-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Estimated reading time: 1 minute
Contact Columnist Form
Trouble in Your Tank: Acid Copper Plating
Introduction
Electroplating a printed circuit board is by no means a trivial task. Higher layer counts, smaller-diameter vias (through-hole and blind) as well as higher-performance material sets contribute to the greater degree of difficulty with today’s technology. So, process engineers pay close attention to the “softer” issues such as cathode current density, solution chemistry (copper sulfate and sulfuric acid concentration) and addition agent control (well, sometime!).
The concern here is that acid copper pattern plating of a printed circuit board has many more critical aspects that must be diligently controlled for optimum performance. These include solution agitation and filtration, anode length and placement, current distribution effects, reducing electrical resistance in the plating cell, photoresist development and controlled organic contamination in the plating solutions. These are the subjects of this article.
Solution Agitation
For uniform surface plating distribution, a homogeneous mixing of the electrolyte is necessary to avoid overplating the surface while the through-hole or blind via is being plated from the bottom up. The engineer should adjust flow rates so as to not create an excessively turbulent solution movement.
Solution agitation of the copper plating electrolyte maybe accomplished with air agitation, eductors, solution impingement and/or cathode bar movement. The main purposes of agitation have been stated many times and include:
- Elimination of solution stagnation and dispersal of reaction products
- Increase of deposition rates by mass transfer enhancement
- Dissipation of heat at electrode/solution interfaces
To read the full version of this article which appeared in the January 2017 issue of the PCB Magazine, click here.
More Columns from Trouble in Your Tank
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5Trouble in Your Tank: Electrodeposition of Copper, Part 6
Trouble in Your Tank: Electrolytic Copper Plating, Part 5
Trouble in Your Tank: Processes to Support IC Substrates and Advanced Packaging, Part 4
Trouble in Your Tank: Processes to Support IC Substrates and Advanced Packaging, Part 3
Trouble in Your Tank: Electrodeposition of Copper, Part 4—Addition Agents
Trouble in Your Tank: Lead-free and the Fabrication Challenge, Part 1
Trouble in Your Tank: Processes to Support IC Substrates and Advanced Packaging, Part 2