SLAC X-ray Laser Reveals How Extreme Shocks Deform a Metal’s Atomic Structure
November 15, 2017 | SLAC National Accelerator LaboratoryEstimated reading time: 4 minutes
When hit by a powerful shock wave, materials can change their shape – a property known as plasticity – yet keep their lattice-like atomic structure. Now scientists have used the X-ray laser at the Department of Energy’s SLAC National Accelerator Laboratory to see, for the first time, how a material’s atomic structure deforms when shocked by pressures nearly as extreme as the ones at the center of the Earth.
The researchers said this new way of watching plastic deformation as it happens can help study a wide range of phenomena, such as meteor impacts, the effects of bullets and other penetrating projectiles and high-performance ceramics used in armor, as well as how to protect spacecraft from high-speed dust impacts and even how dust clouds form between the stars.
The experiments took place at the Matter in Extreme Condition (MEC) experimental station at SLAC’s Linac Coherent Light Source (LCLS). They were led by Chris Wehrenberg, a physicist at the DOE’s Lawrence Livermore National Laboratory, and described in a recent paper in Nature.
“People have been creating these really high-pressure states for decades, but what they didn't know until MEC came online is exactly how these high pressures change materials – what drives the change and how the material deforms,” said SLAC staff scientist Bob Nagler, a co-author of the report.
“LCLS is so powerful, with so many X-rays in such a short time, that it can interrogate how the material is changing while it is changing. The material changes in just one-tenth of a billionth of a second, and LCLS can deliver enough X-rays to capture information about those changes in a much shorter time that that.”
Elusive Atomic Deformations
The material they studied here was a thin foil made of tantalum, a blue-gray metallic element whose atoms are arranged in cubes. The team used a polycrystalline form of tantalum that is naturally textured so the orientation of these cubes varies little from place to place, making it easier to see certain types of disruptions from the shock.
When this type of crystalline material is squeezed by a powerful shock, it can deform in two distinct ways: twinning, where small regions develop lattice structures that are the mirror images of the ones in surrounding areas, and slip deformation, where a section of the lattice shifts and the displacement spreads, like a propagating crack.
But while these two mechanisms are fundamentally important in plasticity, it’s hard to observe them as a shock is happening. Previous research had studied shocked materials after the fact, as the material recovered, which introduced complications and led to conflicting interpretations.
The Tremendous Shock of a Tiny Recoil
In this experiment, the scientists shocked a piece of tantalum foil with a pulse from an optical laser. This vaporizes a small piece of the foil into a hot plasma that flies away from the surface. The recoil from this tiny plume creates tremendous pressures in the remaining foil – up to 300 gigapascals, which is three million times the atmospheric pressure around us and comparable to the 350-gigapascal pressure at the center of the Earth, Nagler said.
While this was happening, researchers probed the state of the metal with X-ray laser pulses. The pulses are extremely short – only 50 femtoseconds, or millionths of a billionth of a second, long – and like a camera with a very fast shutter speed they can record the metal’s response in great detail.
The X-rays bounce off the metal’s atoms and into a detector, where they create a “diffraction pattern” – a series of bright, concentric rings – that scientists analyze to determine the atomic structure of the sample. X-ray diffraction has been used for decades to discover the structures of materials, biomolecules and other samples and to observe how those structures change, but it’s only recently been used to study plasticity in shock-compressed materials, Wehrenberg said.
And this time the researchers took the technique one step further: They analyzed not just the diffraction patterns, but also how the scattering signals were distributed inside individual diffraction rings and how their distribution changed over time. This deeper level of analysis revealed changes in the tantalum’s lattice orientation, or texture, taking place in about one-tenth of a billionth of a second. It also showed whether the lattice was undergoing twinning or slip over a wide range of shock pressures – right up to the point where the metal melts. The team discovered that as the pressure increased, the dominant type of deformation changed from twinning to slip deformation.
Wehrenberg said the results of this study are directly applicable to Lawrence Livermore’s efforts to model both plasticity and tantalum at the molecular level.
These experiments, he said, “are providing data that the models can be directly compared to for benchmarking or validation. In the future, we plan to coordinate these experimental efforts with related experiments on LLNL’s National Ignition Facility that study plasticity at even higher pressures.”
In addition to LLNL and SLAC, researchers from the University of Oxford, the DOE’s Los Alamos National Laboratory and the University of York contributed to this study. Funding for the work at SLAC came from the DOE Office of Science. LCLS is a DOE Office of Science User Facility.
Suggested Items
Groundbreaking Ceremony Marks the Beginning of a New Era for Newccess Industrial; The Construction of the MINGXIN Building
04/12/2024 | Newccess IndustrialOn a clear and sunny day in March, the groundbreaking ceremony for the MINGXIN Building took place in Shenzhen, China. This moment marked the official commencement of construction for a project that will reshape the semiconductor materials industry.
The Need for a Holistic Global Sustainability Standard
04/10/2024 | Michael Ford, Aegis SoftwareNo one can deny that the resources of our fragile planet are finite. The environment seems like a third party, subject to constant degradation. We’re acutely aware of the effects of pollution on our climate, and despite our “throw-away” culture, recycling and recovery of materials has remained relatively expensive, even as we use more energy just to survive.
iNEMI Publishes Four Roadmap Topics
04/04/2024 | iNEMIThe International Electronics Manufacturing Initiative (iNEMI) announces the availability of the first roadmap topics in the new iNEMI Roadmap format. Printed circuit boards, sustainable electronics, smart manufacturing, and mmWave materials and test are now available online.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
Checking In With ICAPE Group
04/03/2024 | Nolan Johnson, I-Connect007ICAPE Group’s field application engineer Erik Pederson drills down on sustainability, supply chain resiliency, and what value engineering really looks like in this exclusive interview. Founded in 1999, European-based ICAPE Group provides 21 million printed circuit boards and over six million technical parts to manufacturers every month. With 30 PCB manufacturing partners globally and 50 partners providing a wide array of technical parts, ICAPE Group has operations in China, Taiwan, Thailand, South Korea, Vietnam, South Africa, Europe, Mexico, and the United States. The company also focuses on the value proposition for its customers.