A Step on the Way to Lithium-Free Batteries
February 12, 2018 | Uppsala UniversityEstimated reading time: 2 minutes
Uppsala researcher Dr Laurent Duda and PhD student Felix Massel together with researchers at the University of Oxford, the University of Kent and the Paul Scherrer Institute have come a long way in finding future lithium-free batteries for devices such as smartphones and laptops.
Smartphone and laptop batteries operate by light alkali ions shuttling back and forth between the anode and cathode. For this purpose, the rechargeable batteries of today use lithium, which is the lightest and smallest of all metal ions. The abundance of lithium salts on Earth is probably insufficient for satisfying the future total demand of energy storage in the world. Therefore it is crucial to study and increase the capacity of battery cathodes based on other light ions. Such ions are for example magnesium and also sodium, an alkali ion provided plentifully by the world’s oceans and in table salt.
An Early Breakthrough
Modern rechargeable batteries made of metal oxides are limited in their capacity since only the metal ions of the cathode are active. An early breakthrough regarding increased battery capacity was achieved little less than two years ago. At that time part of the research team involved in the new study could show that oxygen ions in lithium rich battery cathodes, lend these cathodes their so called extra capacity. However, lithium rich cathodes lose a part of their extra capacity in repeated charge cycles. This is due to the fact that part of the lithium participating in the battery cycling resides closely to the oxygen. When the battery is charged and these lithium ions are removed from the cathode, the oxygen becomes instable and the cathode gradually degrades.
“Many researchers thought that this degrading of the cathode was inevitable and related to the extra capacity of the battery,” says Laurent Duda, researcher at the Department of Physics and Astronomy.
A Stable, Lithium-Free Material
The new study, which looks at the lithium-free material Na2/3[Mg0.28Mn0.72]O2 points to the opposite though. It shows that lithium, or any other kind of alkali ion, does not have to be stored close to the oxygen in a battery that has extra capacity. The studied material is completely free from lithium and instead has sodium ions going back and forth. At the same time the magnesium ions close to the oxygen have a stabilising influence on the material.
The researchers at Oxford have synthesised the studied lithium-free material and together with methods of characterisation used by the Kent researchers they could confirm that the material had the desired extra capacity and was extremely stable too.
Further Optimisation Needed
To confirm that the oxygen indeed was the cause of the extra battery capacity, and to rule out other explanations, the Uppsala researchers used a technique known as resonant inelastic X-ray scattering or RIXS. The Uppsala researchers Laurent Duda and Felix Massel at the Department of Physics and Astronomy have contributed a lot to the strong development of this technique during the last decades. The RIXS-experiment was carried out with world leading equipment on the beamline ADRESS at the Swiss synchrotron radiation laboratory Swiss Light Source.
“Discovering that extra capacity also may be found in lithium-free batteries is a huge progress, but further optimisation of lithium-free cathode materials is needed before they become viable for commercial batteries. Further RIXS-experiments will contribute a lot to our work on this in the close future,” says Laurent Duda.
Suggested Items
Indium to Host Free Webinar on Lead-Free Solder Paste for Automotive Applications
04/09/2024 | Indium CorporationIndium Corporation’s Senior Research Metallurgist, Jie Geng, Ph.D., will conduct a webinar on low-voiding, high-reliability, lead-free solder paste for automotive applications.
Checking In With ICAPE Group
04/03/2024 | Nolan Johnson, I-Connect007ICAPE Group’s field application engineer Erik Pederson drills down on sustainability, supply chain resiliency, and what value engineering really looks like in this exclusive interview. Founded in 1999, European-based ICAPE Group provides 21 million printed circuit boards and over six million technical parts to manufacturers every month. With 30 PCB manufacturing partners globally and 50 partners providing a wide array of technical parts, ICAPE Group has operations in China, Taiwan, Thailand, South Korea, Vietnam, South Africa, Europe, Mexico, and the United States. The company also focuses on the value proposition for its customers.
Nihon Superior Sets New Standards in Lead-Free Soldering Technology at APEX 2024
03/13/2024 | PVANihon Superior Co. Ltd., an advanced joining material supplier, will exhibit in Booth 1325 during the 2024 IPC APEX EXPO, scheduled to take place April 9-11, 2024 at the Anaheim Convention Center in California.
KYZEN’s AQUANOX A4618 and Process Control System at SMTA Dallas Expo and Tech Forum
03/04/2024 | KYZEN'KYZEN, the global leader in innovative environmentally responsible cleaning chemistries, will exhibit at the SMTA Dallas Expo and Tech Forum, scheduled to take place Tuesday, March 19, 2024 at Plano Event Center in Plano, TX.
Reassessing Surface Finish Performance for Next-gen Technology, Part 2
03/04/2024 | Frank Xu, PhD and Martin Bunce of MacDermid Alpha, and John Coonrod of Rogers Corp.The introduction of 5G/6G has created a growing demand for faster rates of data transfer and operation at higher frequencies, pushing signals to travel toward the outer edges of conductors. As a result, the surface finish applied over the copper circuitry is now gaining more attention.