Energy Efficiency on a Roll
April 23, 2018 | KAUSTEstimated reading time: 2 minutes
A system that can recycle excess heat into electricity could help meet the increasing energy demands of a growing global population. KAUST researchers have now engineered a lightweight tubular system that can effectively harvest this abundant, clean source of energy that often goes to waste.
“This will help us address the energy crisis and environmental pollution,” says team leader Muhammad Hussain.
Heat is released into the environment by various sources, ranging from industrial machinery to everyday life objects that warm up during operation, such as electronic devices, household appliances and automotive exhaust pipes.
In a concentrated acid solution, the telluride–polymer film lifted off the substrate and spontaneously curled up into a tube.
Many scientists have attempted to harness this energy source by searching for materials that can create electricity through transforming thermal gradients or temperature differences between hot and cold zones of a system. However, existing thermoelectric materials remain inadequate for high-power generation.
Thermoelectrics hinge on materials that combine high electric conductivity with low thermal conductivity. In these materials, thermal gradients create heat flow, which causes charge carriers to diffuse through the material and produce an electric voltage.
“We are exploring all possible engineering options to augment and maintain the thermal gradient because it directly impacts thermoelectric power generation,” says lead author Devendra Singh. Their team has developed thermoelectric tubular structures of unprecedented length, extending the distance between hot and cold ends and increasing the thermal gradient. The tubes can easily be lengthened for future applications.
By adopting an approach used for sensors, battery technology and cellular vehicle applications, the researchers have invented freestanding thin films that spontaneously roll into seamless tubes under polymer-induced strain. The self-rolling films comprise a stable and easy-to-deposit telluride-containing thermoelectric alloy and a polymer acting as a stress layer.
First, the researchers successively deposited the telluride alloy and polymer layers on a silica-based substrate and consolidated the multilayered architecture by heat treatment. Next, they dissolved the substrate using a concentrated acid solution, causing the telluride–polymer film to lift off and curve up into a tube. “The film rolled upon release because of a stress mismatch between bilayer components,” explains Hussain.
Computer simulations revealed that the tube outperformed solid-rod and flat-slab analogues. Also, it displayed better area efficiency than the slab and competitive advantage compared to the heavier and more expensive rod. A proof-of-concept experiment demonstrated that a tube-based thermopile assembly generated power up to five microwatts for a temperature difference of 60 degrees Celsius.
The team is planning to develop arrays of so-called thermoelectric legs using the self-rolling tubes to optimize power generation.
Suggested Items
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Siemens’ Breakthrough Veloce CS Transforms Emulation and Prototyping with Three Novel Products
04/24/2024 | Siemens Digital Industries SoftwareSiemens Digital Industries Software launched the Veloce™ CS hardware-assisted verification and validation system. In a first for the EDA (Electronic Design Automation) industry, Veloce CS incorporates hardware emulation, enterprise prototyping and software prototyping and is built on two highly advanced integrated circuits (ICs) – Siemens’ new, purpose-built Crystal accelerator chip for emulation and the AMD Versal™ Premium VP1902 FPGA adaptive SoC (System-on-a-chip) for enterprise and software prototyping.
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.
Vicor Power Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/24/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that Vicor Power has finalized the purchase of a Pulsar solderability testing system.
Lockheed Martin Successfully Transitions Long Range Discrimination Radar To The Missile Defense Agency
04/23/2024 | Lockheed MartinThe Long Range Discrimination Radar (LRDR) at Clear Space Force Station in Clear, Alaska, completed DD250 final acceptance and was officially handed over to the Missile Defense Agency in preparation for an Operational Capability Baseline (OCB) decision and final transition to the Warfighter. In addition, prior to this transition, the system has started Space Domain Awareness data collects for the United States Space Force.