On Guard Against Wireless Jamming
July 17, 2019 | A*STAREstimated reading time: 2 minutes
An A*STAR team has developed a ‘guard node’ approach to securing internet of things networks.
As the field of wireless communication advances, the sheer number and variety of smart devices and physical objects connected to the internet will only increase. In this internet of things (IoT) universe, we might observe medical sensors monitoring vital signs in patients in real time, and self-driving cars updating their location every millisecond to avoid collisions.
If society is to rely on these IoT systems for critical functions, protecting them from cyberattacks will be vital. A team of researchers at A*STAR’s Institute for Infocomm Research (I2R) has thus developed a strategy involving a ‘guarding node’ to keep IoT networks secure.
In a typical IoT setup, several remote devices transmit information wirelessly to a base station, which must then separate the signal it receives into individual components, then decipher the original information sent by each device. “The base station has to do this ‘blind,’ without any prior knowledge about the true input signals it is meant to receive,” explained Peng Zhang, a Research Scientist at I2R who led the study.
However, this leaves the network open to being jammed by an attacker transmitting a false signal using the same channel as one of the remote devices, which would contaminate the information received by the base station. This is where the guarding node comes into play.
Put simply, the guarding node can be preconfigured at the base station to inject a known guarding signal into other incoming signals from remote devices—think of this as a barcode being overlaid onto the received signal. When the base station recovers the individual incoming signals from the received signal, it should be able to derive the barcode correctly in a jamming-free environment.
Incoming signals that have been subjected to jamming will have the barcode tampered with in a specific manner. Importantly, by analyzing the pattern of tampering, the base station can derive the original signals using an algorithm. This guard node approach enables greater security over low latency connections, the researchers said.
The traditional response to a jamming attack also introduces communication delays as it requires two separate steps: jamming detection, followed by jamming countermeasures such as switching the communication frequency between the base station and the remote device.
“In contrast, the guard node approach enables us to simultaneously detect the jamming attack, reject the jamming signals, and recover the legitimate signals, with just one snapshot of the received signal, preserving a network’s communication speed and security,” Zhang noted.
Moving forward, Zhang’s team will work on simulating modulated signals that are typical of an industrial IoT environment and demonstrate performance enhancements linked to their guard node approach.
Suggested Items
embedded world 2024: Rohde & Schwarz Presents its Cutting-edge Test Solutions for Embedded Systems
03/27/2024 | Rohde & SchwarzEmbedded systems are the foundation of today’s electronic devices, spanning sectors as diverse as consumer electronics, telecommunications, industrial, medical, automotive and aerospace applications.
Reassessing Surface Finish Performance for Next-gen Technology, Part 2
03/04/2024 | Frank Xu, PhD and Martin Bunce of MacDermid Alpha, and John Coonrod of Rogers Corp.The introduction of 5G/6G has created a growing demand for faster rates of data transfer and operation at higher frequencies, pushing signals to travel toward the outer edges of conductors. As a result, the surface finish applied over the copper circuitry is now gaining more attention.
Beyond Design: Embedded Capacitance Material
02/22/2024 | Barry Olney -- Column: Beyond DesignEmbedding components into the multilayer PCB substrate can have many benefits, including reduced board size and improved signal integrity. However, embedded capacitance material (which is not really a component but rather part of the substrate) can improve power integrity dramatically by reducing AC impedance and generally enhancing the performance of the product. It takes up no additional space, is easy to implement (because it is compatible with standard FR-4 processes), and can be cost-effective.
RoBAT Brings TDR Test to Bare and Assembled PCBs
02/19/2024 | Andy Shaughnessy, Design007 MagazineIn an interview at DesignCon, Gregory Miczek, global applications manager with RoBAT, discussed the company’s background and its expansion path from backplane defect analyzers to TDR testers for high-tech bare and assembled boards.
Connect the Dots: Controlled Impedance and Calculations for Microstrip Structures
12/28/2023 | Matt Stevenson -- Column: Connect the DotsModern high-speed and RF PCB design is an exciting field but comes with its own set of challenges. Signal integrity, performance, and crosstalk become major concerns. Designers for these types of projects need to learn how to control electromagnetic interference (EMI) and compatibility (EMC), which means utilizing some interesting math and calculations.