Real-Time 4k Video Transmission Made Possible with High-Speed Millimetre Wave Technology
August 22, 2019 | CORDISEstimated reading time: 2 minutes
The advent of 5G broadband will open a whole new range of possibilities, such as 360-degree video streaming and immersive virtual reality applications. Perhaps more important are all the new services that will arise as a result. Imagine a world in which all devices are wirelessly connected, with drones monitoring traffic and assisting in search and rescue missions. A world in which autonomous vehicles communicate with each other, and wearable devices provide real-time health monitoring and alert doctors in an emergency.
Steps toward such a reality have been taken in the EU-funded 5G MiEdge project launched in 2016. The work done has contributed to the development of a mmW wireless communication system that has made long-distance communication possible. Using this system, 4K uncompressed video has been transmitted in real time from a drone. The video transmission system developed has a mmW wireless communication device with a small, light lens antenna that can be fitted to a drone. An additional advantage is the significantly shorter delay compared to conventional compressed transmission.
Live Drone Test on 5G Network
The project team conducted a demonstration in which they used a drone to take video in 4K. The video was transmitted in real time from more than 100 m away to an access point on the ground. In this demonstration, the roadside units (RSUs) used 3D-LiDAR sensor systems to create a dynamic 3D map that was shared with other RSUs via mmW communication. The vehicle communicated with the RSU to receive a merged, global, real-time, dynamic 3D map that extended its area of perception, contributing to better traffic safety and efficiency.
This wireless communication system is based on the technology developed by the project to overcome the weaknesses of mmWs and mobile edge computing (MEC) that have garnered interest for use in 5G networks. Despite their promising ability to enable high-speed communication, mmWs have high attenuation levels, which means that the radio signal becomes weaker over distances. Another issue was backhauling—getting data to a point from which it can be distributed over a network—since 10 Gigabit Ethernet backhaul can’t be provided everywhere. While MEC is capable of bypassing the backhaul networks’ limited capacity by making cloud computing capabilities and IT service environments possible at the edge of a network, it has other shortcomings. Namely, reallocation of computation resources isn’t easily achieved on demand while still meeting the strict latency constraints expected in 5G networks.
Project partners compensated for each system’s deficiencies by combining mmW access and MEC to form the mmW edge cloud, developing a novel control pane that can collect and process user information so that resources can be allocated proactively, and creating a user/application-centric 5G network.
The 5G MiEdge (5G MiEdge: Millimeter-wave Edge cloud as an enabler for 5G ecosystem) technology is being demonstrated in other use case scenarios besides automated driving. One is ultra-fast wireless connection in airports, train stations and shopping malls to facilitate ultra-high-speed content downloads and massive video streaming. Other scenarios include wireless communication for passengers on trains, buses and planes, public video surveillance and 3D live video broadcasts for dynamic crowds in outdoor city areas. The project also intends to showcase its technologies at the 2020 Summer Olympics in Tokyo.
Suggested Items
Real Time with... IPC APEX EXPO 2024: MYCRONIC's Evolution and New Solutions
04/17/2024 | Real Time with...IPC APEX EXPOHenry Crandall interviews Kevin Clue, the vice president of global sales for MYCRONIC's High Flex division. They discuss the company's evolution, emphasizing its strong customer relationships and its role as a versatile, turnkey solution provider. Kevin unveils new solutions launched at IPC APEX EXPO, including an AI-integrated inspection system and the A40 pick-and-place platform. The conversation also touches on the increased use of AI and deep learning.
Australian Flow Batteries and The SCHMID Group Announce Groundbreaking Memorandum of Understanding
04/17/2024 | SCHMID GroupAustralian Flow Batteries Pty Ltd (AFB), a leader in innovative energy solutions and economical, safe, and reliable power storage, and SCHMID Energy Systems GmbH a company of the German SCHMID Group, a global technology leader with a rich history in delivering innovative solutions across multiple industries including Electronics, Renewables, and Energy Storage sectors, are thrilled to announce the signing of a Memorandum of Understanding (MoU)
Ansys Joins BAE Systems’ Mission Advantage Program to Advance Digital Engineering Across US Department of Defense
04/16/2024 | ANSYSAnsys announced it is working with BAE Systems, Inc., to accelerate the adoption of digital engineering and MBSE across the Department of Defense (DoD).
Designing Electronics for High Thermal Loads
04/16/2024 | Akber Roy, Rush PCB Inc.Developing proactive thermal management strategies is important in the early stages of the PCB design cycle to minimize costly redesign iterations. Here, I delve into key aspects of electronic design that hold particular relevance for managing heat in electronic systems. Each of these considerations plays a pivotal role in enhancing the reliability and performance of the overall system.
SIA Applauds CHIPS Act Incentives for Samsung Manufacturing Projects in Texas
04/16/2024 | SIAThe Semiconductor Industry Association (SIA) released the following statement from SIA President and CEO John Neuffer applauding semiconductor manufacturing incentives announced by the U.S. Department of Commerce and Samsung.