Base Station Vendors Turn to Sectorization, Active Antenna Systems, and Cell Shaping to Tackle 5G
October 16, 2019 | ABI ResearchEstimated reading time: 1 minute
As 5G networks start commercial operations in countries including the United States, South Korea, China, and Japan, Base Station Antenna (BSA) vendors are innovating and coming to grips with the complex feature sets and performance demands required in a modern BSA. ABI Research identifies three trends in BSA design which improve the performance, enhance the features, and reduce the costs associated with a modern BSA.
“Sectorization, Active Antenna Systems (AAS) and Cell Shaping are the three overarching trends emerging from vendor’s roadmaps which are used to tackle the demands of 5G,” says Nick Marshall, Research Director at ABI Research.
Higher order sectorization using multi-port/multi-band and/or multi-beam antennas is being used to upgrade a cell site from a standard three sectors to six sectors or more. “Sectorization increases the number of sectors without increasing the number of antennas or radiation centers on the tower and represents important cost savings because towers are increasingly occupied by multiple BSAs and other equipment,” continues Marshall.
Active Antenna Systems (AASs) are the second trend. An AAS contains active radio electronics inside the BSA radome with the antenna/radio combination connected back to the to the baseband with fiber. “Although more expensive than legacy passive antennas, AASs enable high-order and massive MIMO features for sector throughput enhancements, reductions in cable losses and power consumption,” says Marshall.
Included in AAS are a new type of hybrid active/passive BSA which are antenna systems integrating massive MIMO antennas with passive antennas and which share electronics, radio frequency components, and chassis between the active and passive antennas. “As a compact single unit, hybrid active/passive antennas reduce wind load and, since components are shared, offer a lower initial cost when compared to traditional options,” says Marshall.
The third overarching driver is proactive cell shaping, where beamforming is used to shape or sculpt overall cell coverage. Sector sculpting in the cell shapes the Radio Frequency (RF) radiation pattern with directional antennas, which can be steered both in azimuth and elevation. Sculpting delivers precise wireless coverage with minimal interference with neighboring cells.
“The key takeaway from these and other innovations is that antenna vendors are rising to the complex challenges of delivering 5G with highly innovative and technically elegant BSA designs,” concludes Marshall.
Suggested Items
Lockheed Martin Successfully Transitions Long Range Discrimination Radar To The Missile Defense Agency
04/23/2024 | Lockheed MartinThe Long Range Discrimination Radar (LRDR) at Clear Space Force Station in Clear, Alaska, completed DD250 final acceptance and was officially handed over to the Missile Defense Agency in preparation for an Operational Capability Baseline (OCB) decision and final transition to the Warfighter. In addition, prior to this transition, the system has started Space Domain Awareness data collects for the United States Space Force.
Real Time with... IPC APEX EXPO 2024: AI Implementation at Omron
04/18/2024 | Real Time with...IPC APEX EXPOEditor Nolan Johnson and Omron Product Manager Nick Fieldhouse discuss the company's focus on AI implementation to enhance customer experience and results. They address programming challenges and how AI can help customers achieve better outcomes with less experience. Omron's AI is compatible with existing systems, facilitating easy upgrades.
Cadence Unveils Palladium Z3 and Protium X3 Systems
04/18/2024 | Cadence Design SystemsThe Palladium Z3 and Protium X3 systems offer increased capacity, and scale from job sizes of 16 million gates up to 48 billion gates, so the largest SoCs can be tested as a whole rather than just partial models, ensuring proper functionality and performance.
Australian Flow Batteries and The SCHMID Group Announce Groundbreaking Memorandum of Understanding
04/17/2024 | SCHMID GroupAustralian Flow Batteries Pty Ltd (AFB), a leader in innovative energy solutions and economical, safe, and reliable power storage, and SCHMID Energy Systems GmbH a company of the German SCHMID Group, a global technology leader with a rich history in delivering innovative solutions across multiple industries including Electronics, Renewables, and Energy Storage sectors, are thrilled to announce the signing of a Memorandum of Understanding (MoU)
Ansys Joins BAE Systems’ Mission Advantage Program to Advance Digital Engineering Across US Department of Defense
04/16/2024 | ANSYSAnsys announced it is working with BAE Systems, Inc., to accelerate the adoption of digital engineering and MBSE across the Department of Defense (DoD).