Plug-and-play for Higher Purity
November 25, 2019 | TA-POEstimated reading time: 3 minutes
Separating transformers, electric motors, but also small fractions of copper wire from ferrous scrap streams is a piece of cake for the TA-PO 1000, a solution developed by Dutchman Roberto van den Kieboom.
TA-PO is a relatively young recycling technology firm from the Netherlands that designs and fabricates lines to separate magnetic material from partially magnetic material. Company founder and CEO Roberto Van den Kieboom is on a mission. ‘Asia’s scrap import restrictions have made clear there is no future for mixed materials,’ he says. ‘Our solutions help recyclers reach the higher purity and quality required by the smelters.’ Other advantages include multiple shredding and the end of any sorting by hand.
The TA-PO 1000 is a complete plug-and-play line that can be used to separate current electronic scrap flows from 0 to 130 mm in a clean iron fraction with less than 0.3% copper. This fraction after separation is approximately 80% of the total input of the TA-PO 1000 separator, the remaining 20% consists of transformers, electric motors, small copper wire, printed circuit boards and more.
Tiny copper fractions
Van den Kieboom: ‘These e-scrap fractions are often cleaned as much as possible by hand sorting. However, it appears that the ferrous metal usually contains more than 0.3% copper, which is a shame because it cannot be used as a high-quality raw material. And the copper is in the iron fraction for which ultimately is not paid for.’
Another thing, says the entrepreneur, it’s impossible to separate small copper wire by hand. ‘But by using the TA-PO 1000, even the smallest pieces of wire automatically end up with the transformers and electric motors.’
The TA-PO saves labour costs. Separating eight tonnes of e-scrap fraction by hand requires four human sorters. The TA-PO 1000 separator can be used 24/7 with an up-time of 99%.
Powerful magnetics
The TA-PO 1000 features a specially developed magnet which separates 100% magnetic parts (clean iron) from partly magnetic parts (transformers, electric motors, printed circuit boards, etc.) at a high speed via a vibrating feeder, chute and conveyor belt through amagnetic field.
Asked for the machine’s capacity, Van den Kieboom says: ‘It all depends on the scrap input, size of the fractions and the settings of the technology. On average, it is 10 to 30 tonnes per hour. But we are currently working on a unit capable of processing up to 70 tonnes per hour.’
Easy to maintain
Bulk weight, fraction size and required settings determine the capacity of the TA-PO 1000. Smart design means maintenance is carried out quickly. Challenging parts such as side guide caps and the sliding channel can be opened automatically via a touchscreen, conveniently as well as safely because the machine can no longer be started at these times.
Remote service
All TA-PO 1000 separation machines are equipped as standard with a modem so that support can always be provided remotely. Adjustments can also be carried out by the operator’s own staff after a brief explanation. When acorrect separation result has been achieved, this adjustment can easily be saved as standard and quickly recalled. The TA-PO 1000 can either be used as stand-alone unit or directly in line behind the shredder and existing magnet system.
Ready to use… indoors or outdoors
The TA-PO 1000 has a 15 metre cable and a 380 volt / 32 amp plug, so it canbe used everywhere without having to make special provisions in advance. The entire TA-PO 1000 separation machine is almost 11 metres long, 1.65 metres wide and 3.4 metres high with a total weight of less than seven tonnes.
According to Van den Kieboom, indoor installation is preferable but the TA-PO 1000 also performs well under extreme climate conditions: ‘Even at minus 10 Celsius, but also at plus 45 Celsius.’ Partly thanks to its galvanised and double-layer powder-coated base frame, a long service life is guaranteed.
Suggested Items
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources:
Matrix to Exhibit at IPC APEX EXPO 2024 in Anaheim, CA
03/05/2024 | MatrixMatrix will be exhibiting at IPC APEX EXPO 2024, to be held on April 9-12, 2024, at the Anaheim Convention Center, Anaheim, CA.
The Chemical Connection: Getting to Know Your Vendor
02/16/2024 | Don Ball -- Column: The Chemical ConnectionAfter working for a capital equipment supplier for almost 50 years, I’ve found that the most important part of getting to know your vendor is good communication among all parties. While contact between fabricators of a constantly changing product line and the designers of those products may occur daily or weekly, conversations between you and your equipment supplier may be years apart. That lengthy gap often means that previous contacts may have been promoted, retired, or moved on to other opportunities. You may have also migrated to a new supplier with whom you have little or no history. In either case, you will be interacting with someone you are unfamiliar with (as they are with you). Therefore, it is essential for both sides to communicate clearly so expectations will align.
EIPC Winter Conference 2024, Day 2: A Closer Look at Global Trends
02/14/2024 | Pete Starkey, I-Connect007The opening session of the second day’s conference proceedings focused on global PCB trends and was introduced and moderated by Dr. Michele Stampanoni, vice president of strategic sales and business development at Cicor Group in Switzerland. He opened the session with Dr. Hayao Nakahara’s knowledgeable and enlightening video presentation on the IC substrates industry.