Swissbit Releases e.MMC EM-20 with Improved Firmware
April 1, 2020 | Swissbit AGEstimated reading time: 1 minute
Swissbit AG gives its proven e.MMC memory modules a firmware update. The robust and durable e.MMC 5.0 for industrial applications now features permanent lifetime monitoring. The new firmware allows very precise testing and extrapolation of aging behavior, based on the conditions of different applications. This enables reliable prediction of the lifetime of flash memory in critical applications and minimizes failures.
Swissbit offers the e.MMC 5.0, available in capacities from 4Gb to 64Gb, as a freely configurable MLC version EM-20 and as a preconfigured pSLC memory EM-26. The managed NAND modules for the industrial temperature range from -40°C to 85°C are perfect as boot data carriers as well as for write-intensive applications. As components that are permanently soldered via BGA, they cannot be replaced – therefore the prediction of the service life of an e.MMC is essential in helping to define the scope of an application.
Two major firmware improvements
The new firmware for EM-20 and EM-26 provides a very accurate counter for target, average and maximum block erases in the MLC and pSLC regions, as well as for the number of spare blocks on each chip. It also provides access via the Extended CSD Register, which is implemented as the default procedure for each e.MMC host driver. Due to this innovation, it is possible to compare the average deletion counter with the target deletion counter after a short test phase, and to then extrapolate the results reliably. Access via the Extended CSD Register has been chosen to provide a completely standard access path, unlike implementations that use vendor-specific access patterns.
For long-lasting solutions
Although the e.MMC Standard supports a basic lifetime control, it shows the percentage wear of the memory only in a coarse resolution. For reliable extrapolations within the scope of the Standard, the test time is several weeks. The lifetime forecast for a specific application profile is significantly faster and more precise thanks to the new Swissbit firmware. This makes it easier to select the capacity that is needed for the life of the application.
“We are constantly investing in the improvement of our products in order to be able to offer our customers reliable storage and embedded IoT solutions,” explains Roger Griesemer, General Manager Memory Solutions at Swissbit. “The new firmware is a big step towards effectively managing the service life of our e.MMC modules.”
Suggested Items
UHDI Fundamentals: ASC Sponsors Ultra High Density Interconnect Symposium
03/21/2024 | Anaya Vardya, American Standard CircuitsAmerican Standard Circuits (ASC) is a major sponsor of an upcoming symposium on one of the most talked about new technologies that has come along in quite a while: ultra high density interconnect (UHDI).
Standards Development Propels the Industry Forward
03/20/2024 | Teresa Rowe, IPC Senior Director, Assembly and Standards TechnologyStandards development task groups will meet face-to-face at IPC APEX EXPO, April 6–11. The technical discussions provide an opportunity to share knowledge, learn from other subject matter experts, and network with others who have similar technical interests. You may remember the urgent need for coffee and the possibility of snagging a cookie or a granola bar to maintain the necessary energy level for these marathon sessions.
Flex Earns Coveted Spot on Ethisphere's 2024 World's Most Ethical Companies for Second Consecutive Year
03/12/2024 | FlexFlex announced its inclusion as one of Ethisphere's 2024 World's Most Ethical Companies in the category of industrial manufacturing. This recognition underscores Flex's unwavering commitment to ethical business practices, integrity, and corporate social responsibility.
AIM Solder Recognized for 25 Years of IPC Membership
03/08/2024 | AIM SolderAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its receipt of recognition for 25 years of IPC membership.
Demystifying the IPC Technical Activities Executive Committee Global
02/28/2024 | Linda Stepanich, IPCYou have an excellent idea for a new standard in the electronics manufacturing industry. How do you turn that idea into a reality? It’s simple: You submit a PIN to the TAEC. Now, what does that even mean? To develop a new standard, you need the help of the IPC Technical Activities Executive Committee (TAEC) Global. Ideas for new IPC standards are submitted via Project Identification Notification (PIN) to TAEC Global, which conducts an initial review. The PIN is then sent to the general TAEC standards development oversight committee for review and approval. Now, how do they review it and who comprises the committee?