BGA Device for Embedded Applications: EM-30 from Swissbit Available Now
December 7, 2021 | Swissbit AGEstimated reading time: 2 minutes
Swissbit has extended its range of miniaturized storage solutions with the launch of its EM-30 series with an e.MMC-5.1 standard interface. The BGA device uses industrial grade 3D-NAND and is available in capacities from 16 to 256 GB. With the new series, Swissbit has responded to the increasing demands of embedded systems for ultra-small, vibration-resistant designs with escalating memory capacity requirements. In addition to durability and a temperature range of -40 up to +105 °C, Swissbit’s EM-30 also offers additional features over and above the e.MMC standard. These include a remote secure firmware update option and an extended lifetime expectation, making the EM-30 product series ideal for a wide range of applications that include POS/POI terminals, routers and switches, through to solutions for industrial automation, the Internet of Things (IoT), automotive or medical systems.
The EM-30 product series (153 Ball BGA, 100 ball BGA option available) complies with e.MMC-5.1 specifications and is fully downward compatible. With sequential data rates of up to 300 MB/s for read and 230 MB/s for write as well as 40 and 42 k IOPS for read and write random access, EM-30 delivers the performance of SATA SSDs, but with significantly smaller size requirements and costs.
EM-30 is designed for an industrial temperature range of -40 to +85 °C as standard. Optionally, the e.MMC is also available for an extended temperature range of -40 to +105 °C, designed to meet the requirements of demanding automotive applications.
Predictable service life, data refresh and reliability
Especially for soldered-down components, knowing the expected service life under real conditions is important. EM-30 devices offer the option to access detailed information about the consumption of the write cycles and internal resources via standard access to the e.MMC registers without the need for special access methods or drivers.
In addition, similar to large SSDs, the EM-30 firmware supports automatic background data refresh of read-only areas that for instance occur with boot media. This feature coupled with strong error correction, ensures that data availability is always highly reliable, even if the data has not been accessed under prolonged periods of exposure to high temperatures.
A further special feature is the increased protection against data corruption in the event of sudden power loss, which not only occurs in regions with an unstable power supply, but also typically when handling medical devices or embedded systems.
Flexible configuration
If and when required, EM-30 devices can be partitioned by the user into several TLC and pSLC segments. If the maximum possible endurance of the NAND is required, Swissbit offers an EM-36 variant preconfigured to 100% pSLC. These types are also now available in capacities between 5 and 80 GB.
Suggested Items
Real Time with... IPC APEX EXPO 2024: Industrial Quality Solutions from Zeiss
04/23/2024 | Real Time with...IPCEditor Nolan Johnson and Herminso Gomez of Zeiss Group discuss the company's industrial quality solutions, with a focus on X-ray technology. Zeiss provides a range of microscopy options and Herminso highlights the advantages of X-ray technology for aerospace, medical, and consumer electronics sectors.
Altair Acquires Cambridge Semantics, Powering Next-Generation Enterprise Data Fabrics and Generative AI
04/22/2024 | AltairAltair a global leader in computational intelligence, acquired Cambridge Semantics, a modern data fabric provider and creator of one of the industry’s leading analytical graph databases.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
04/19/2024 | Marcy LaRont, PCB007 MagazineFor my must-read picks of the week, I’m highlighting Parker Capers, a young professional seeking employment, solid counsel from Dan Beaulieu on what your post-show plan should look like, more information and insight on “chiplets” and the need for secure data transfer standards from columnist Preeya Kuray, as well as Matt Stevenson’s design for reality wisdom. It’s a reminder to download one of our newest books (there are several) you don't want to miss if you are an assembler.
D Coupon Testing and Data Insights With GreenSource Fabrication
04/17/2024 | Marcy LaRont, PCB007 MagazineMarcy LaRont spoke with Steve Karas of GreenSource Fabrication at the SMTA UHDI conference in March. He presented a case study that GreenSource undertook with a customer on critical via reliability with advanced materials and used the experience to highlight the importance and effectiveness of D coupon testing. He also discussed GreenSource’s approach to data aggregation and a new system they developed to use collected data effectively.
Real Time with... IPC APEX EXPO 2024: Innovations in Thermal, Warpage, and Strain Metrology
04/17/2024 | Real Time with...IPC APEX EXPOEditor Nolan Johnson talks with Neil Hubble, president of Akrometrix, about the company's leadership in thermal, warpage, and strain metrology. Neil details how Akrometrix is committed to addressing customer challenges through technological evolution, innovative solutions, and a focus on data processing. A tabletop unit for thermal warpage testing is showcased at IPC APEX EXPO this year.