Boeing Salt Lake Team Trades Hand Tools for Robots
July 28, 2015 | BoeingEstimated reading time: 4 minutes
To help meet Commercial Airplanes increased production rates, Boeing Salt Lake employees are transforming the way they build and paint 787-9 horizontal stabilizers.
Painters in particular are trading in their paint guns and learning to operate robots that more efficiently and safely meet the stringent painting requirements of the 787's horizontal stabilizers.
Since initiating the transition to Advanced Manufacturing tools in 2014, the Boeing Salt Lake site has consistently achieved first-pass quality, thereby reducing rework and overall flow through the paint shop, site leaders say. The robots simultaneously reduce ergonomic and safety concerns for employees, while reducing paint consumption and environmental waste.
“With our increased rates, we had to find a way to avoid rework, which could take an entire day,” said Ian Pierce, a manufacturing engineer who helped improve the process.
“Very tight tolerances in the surface finish make it almost impossible to paint perfectly by hand.”
So far, the robots have painted more than 20 sets of horizontal stabilizers and more than 20 primed multi-spar boxes with 100 percent quality. The robots also accomplish their tasks in about 60 percent less time, Pierce said, citing another benefit:
“There are 100 percent less (paint) fumes affecting the painters, creating a much safer environment," Pierce added.
The move to robots began in part because the Boeing Salt Lake site needed to convert its existing 35,000 square-foot (3,250 square meters) building to support additional 787-9 demand -- without expanding the building.
With the rate increases, employment in the shop has grown and painters now have the opportunity to learn and build additional skills.
Manufacturing and engineering employees explored ways to minimize painting issues through months of tests that involved various temperatures, humidity and other factors.
“The biggest variable was the human element,” Pierce said. “We put together a cross-functional team, including equipment engineering, purchasing, business operations, quality assurance, painters, and manufacturing engineering; and with the assistance of interns from the University of Michigan, we decided to use robots.”
The team visited Boeing paint shops to harvest company knowledge and spent time where the automobile industry has learned to paint with perfection: Detroit, he said.
The information they gathered solidified the decision to pursue automation, Pierce said.
Boeing Salt Lake's painters are still learning the system and how to troubleshoot issues, said Bryan Woodward, a Boeing painter for 10 years. Encore Automation a robotics company in Auburn Hills, Michigan, specializing in paint finishes, was chosen as the on-site integrator for the new process and has representatives on-site to provide training and help.
Woodward, who never worked with robots before, said he sees real advantages in the automated system.
“Ergonomically, it’s great, because we’re not physically doing this work,” he said.
Woodward expects the automated painting system will take variability out of the process and produce consistent, 100-percent quality paint jobs.
“The painters are looking forward to seeing how everything will work," he said. "We enjoy painting and this is a big change, but it’s a good thing and we’re learning different skills.”
Pierce, meanwhile, said Boeing Salt Lake's system eventually can be replicated at other Boeing sites.
“Our goal is to make this work for us and share our lessons with the rest of Boeing,” he said. “Our purpose is to make a better product with less strain and stress on our painters. We want to avoid injuries while producing perfect quality and meeting every requirement the first time.”
Teaming with 'Butch and Sundance'
While Boeing Salt Lake painters learn to use advanced manufacturing tools to paint, mechanics who hand-drilled holes to install fasteners into horizontal stabilizers are teaming up with “Butch and Sundance.”
That's what employees call the "drill and fill" robots they are learning to operate that flank the sides of each horizontal stabilizer. It's a playful nod to colorful Wild West characters, Butch Cassidy – who grew up near Salt Lake City – and the Sundance Kid. Yet naming the robot twins also acknowledges their importance to providing enhanced quality, superior ergonomics and reduced work time.
"Butch and Sundance" use a camera to position, drill and countersink each hole, and measure the panel's diameter and thickness. Their tasks include inserting fasteners, smoothly micro-milling fastener stems to match the skin-panel surface, and inspecting the completed work.
The automated fastener installation cell is now in full production and the team just completed its first production 787-9 horizontal stabilizer multi-spar box. Joshua Carlsen, a manufacturing engineer, said process time has been reduced by 80 percent and rework is virtually eliminated.
“The blind fasteners were being installed by hand, but there was a 20 percent failure rate,” said Carlsen, who with his colleagues and Boeing Research & Technology expert Mark Woods, studied how to improve processes.
With more than 1,000 fasteners in a horizontal stabilizer's contoured surface, there's a high risk of quality and ergonomic issues, he said.
“We wanted a much higher quality installation, along with greater speed to meet our rate requirements," he said. "We needed to make the process ergonomic to eliminate repetitive stress issues.”
The team settled on automation, and its success has opened the door to an expanded work statement.
“This has demonstrated the flexibility of a robotic work cell,” Joshua said. “We may use robots for various applications in the future.”
Suggested Items
Cogiscan Collaborates with Koh Young to Unveil How Factory Insights Software Transforms Data Into Action at IPC APEX EXPO
03/28/2024 | Koh YoungKoh Young, the industry leader in True3D measurement-based inspection solutions, is excited to announce Factory Insights, the latest offering from Cogiscan, will be demonstrated alongside KSMART in Koh Young booth 2112 during IPC APEX Expo.
ASMC 2024 to Showcase AI, Smart Manufacturing and Sustainability to Advance Chip Industry Manufacturing Expertise
03/27/2024 | SEMIMore than 125 experts will offer insights into the latest semiconductor manufacturing strategies and methodologies as hundreds of industry stakeholders gather at the 35th annual SEMI Advanced Semiconductor Manufacturing Conference (ASMC 2024), May 13-16 in Albany, New York.
NextFlex Announces $5M Education Fundraising Effort: First Spotlight - Transforming the Landscape for Women in Technology
03/27/2024 | BUSINESS WIRENextFlex Learning Programs, the education-focused arm of the NextFlex® Hybrid Electronics Manufacturing Innovation Institute, announces its first spotlight effort, “NextFlex Supports Women in STEM” to increase the number of women in STEM fields, which could accelerate U.S. GDP growth by boosting women’s cumulative earnings by $299B and adding $5.9T to the global stock market within 10 years according to S&P Global.
Don Dennison Appointed to Roll Out KIC’s Latest Thermal Analysis System Software in the Northeast
03/26/2024 | KICKIC, a renowned pioneer in thermal process and temperature measurement solutions for electronics manufacturing, is pleased to announce the appointment of PIT Equipment Services, LLC, led by Don Dennison, as its representative for New York, New Jersey, and Eastern Pennsylvania.
ACDi Takes Milestone Delivery of the 23,000th Koh Young Machine
03/26/2024 | ACDiAccording to ACDi (American Computer Development, Inc.), “Flexible, reliable, and equipped to keep your project on schedule, is what you need as an electronics manufacturing services partner.”