Optomec Showcases Latest Additive Manufacturing Print Heads at RAPID + TCT 2023
May 3, 2023 | Business WireEstimated reading time: 1 minute
Optomec, a leading manufacturer of Additive Manufacturing machines for both 3D Printed Metal and Printed Electronics will showcase its latest print solutions for each technology at RAPID + TCT 2023. For 3D Printed Metal, Optomec will be displaying its LDH 3.1 print head for Directed Energy Deposition (DED) that allows users to change the spot size of the laser during a build or repair. For Printed Electronics customers, Optomec will announce its latest Aerosol Jet® print head which delivers a compact, low maintenance solution for production applications. Optomec will be showing these new solutions in booth 5027.
The LDH 3.1 print head delivers superior 3D metal builds by allowing the operator to vary the laser spot size and power density remotely and therefore optimize the deposition for print speed and metallurgical properties. For example, larger portions of the build can utilize a larger laser spot for a higher deposition rate while a smaller laser spot can be used for finer features of the build. This can be accomplished remotely, without breaking the inert atmosphere of the machine’s build chamber.
The new Endurance print head for Aerosol Jet machines delivers a compact, simplified print head for electronics production. The new design is optimized for longer operating runs and quicker maintenance. It is available with an ultrasonic atomizer for use on a variety of inks. Optomec’s Printed Electronics machines enable manufacturers to create extremely fine 3D electronic structures–such as circuits, sensors, antennas and interconnects–with features as small as 10 microns using nanoparticle inks. The machines are widely used in the Aerospace and Defense, Energy, Medical Device, Advanced Electronics Packaging and Research segments.
“We are pleased to be showcasing our latest production print solutions at RAPID this year.” said Mike Dean, VP of Marketing at Optomec. “On both sides of business--printed metal and printed electronics--we have been innovating in the base print technology at the heart of the additive machine. Both the LDH 3.1, which began shipping recently, and the Endurance print head, which we are just announcing, were developed in response to our production customers who are looking for robust AM processes that are easy to integrate into their operations.”
Suggested Items
Warm Windows and Streamlined Skin Patches – IDTechEx Explores Flexible and Printed Electronics
04/26/2024 | IDTechExFlexible and printed electronics can be integrated into cars and homes to create modern aesthetics that are beneficial and easy to use. From luminous car controls to food labels that communicate the quality of food, the uses of this technology are endless and can upgrade many areas of everyday life.
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics
04/24/2024 | I-Connect007 Editorial TeamIn our fast-changing, deeply competitive, and margin-tight industry, factory analytics can be the key to unlocking untapped improvements to guarantee a thriving business. On top of that, electronics manufacturers are facing a tremendous burden to do more with less. If you don't already have a copy of this book, what follows is an excerpt from the introduction chapter of 'The Printed Circuit Assembler’s Guide to... Factory Analytics: Unlocking Efficiency Through Data Insights' to whet your appetite.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Winner of The Science Show Rakett 69 Receives Incap Scholarship
04/24/2024 | IncapThe winner of the Rakett 69 science show, Andri Türkson, who stood out as an electronics enthusiast, received a scholarship from Incap Estonia, along with an internship opportunity in Saaremaa.