-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueBreaking High-speed Material Constraints
Do you need specialty materials for your high-speed designs? Maybe not. Improvements in resins mean designers of high-speed boards can sometimes use traditional laminate systems. Learn more in this issue.
Level Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Book Excerpt: 'The Printed Circuit Designer's Guide to... Manufacturing Driven Design,' Chapter 4
September 12, 2023 | I-Connect007 Editorial TeamEstimated reading time: 1 minute
Excerpt from: The Printed Circuit Designer's Guide to... Manufacturing Driven Design, Chapter 4—Concurrent and Intelligent DFM
Bridging the Gap
If Manufacturing Driven Design is to be considered as the eventual end goal of the larger product manufacturing process, it is worthwhile to consider where the current industry is in terms of adoption of this methodology. I spent a good deal of time in Chapter 3 specifically explaining what DFM is not. In this chapter, we will cover what, and where, DFM currently is. DFM has been evolving away from the rudimentary and manual selection Engineering Rules Files to an automated and intelligent means of assigning manufacturing process requirements based on design characteristics.
It could be suggested that DFM is meant to represent the manufacturers’ interpretations of the design requirements only from a process perspective. This may suggest that DFM should have been viewed as a transitional solution that is better off taken into consideration throughout the design process. Widespread technological adoption of MDD within the PCB industry has been rather cautious as a whole, especially when compared to similar fields which have already adopted an MDD approach. Many within the industry see the evolution of DFM as the end solution, instead of as a transitionary approach to manufacturing. Within late-stage DFM, there are several significant advancements that are now emerging which show promise in bridging the gap between Digital Rule Checks (DRCs) and MDD. These are the use of Concurrent DFM and Intelligent DFM.
Both concurrent and intelligent DFM complement each other within the typical workflow and represent the beginnings of a transition away from a classical DFM, allowing for an improved NPI process.
Suggested Items
Marcy’s Musings: The ‘Magic’ of Additive Processes
05/21/2024 | Marcy LaRont -- Column: Marcy's MusingsThough modern semi-additive and fully additive technologies are still emerging for PCB manufacturing, additive technology itself is not new. Many PCB fabricators find themselves at a crossroads when deciding whether to change their current processes and go additive or stay the course until something significant compels a change. But change is on the horizon, and it seems to be driven by significant technological advancements in chips and advanced packaging, offering PCB fabricators some additive manufacturing solutions to explore.
Real Time with… IPC APEX EXPO 2024: Custom PCB Solutions With Adura
05/20/2024 | Real Time with...IPC APEX EXPOColumnist Dan Beaulieu and Sumit Tomar, CEO of Adura, discuss the company's comprehensive manufacturing of custom PCBs. The company excels in thermal PCB technology for enhanced conductivity. As Sumit explains, they also plan to venture into power management, leveraging their U.S.-based manufacturing capabilities.
Zentech First to Adopt IPC Apprenticeship National Program Standards
05/20/2024 | Cory Blaylock, IPCIPC achieved a landmark in 2023 by creating an apprenticeship program approved by the U.S. Department of Labor. With such a registered framework in place, industry can work through IPC to secure local, state, and federal dollars for workforce development in a way they’ve never been able to do before. Zentech Manufacturing, headquartered in Baltimore, Maryland, with production facilities in Bloomington, Illinois, and Richardson, Texas, is the first employer partner to adopt IPC’s national program. Click here to read their story.
Danutek Celebrates 20 Anniversary
05/20/2024 | DanutekDanutek, a leading supplier of capital equipment and service support to the electronics manufacturing sector in Europe, proudly marks its 20th anniversary this year.
GlobalFoundries Appoints KC Ang as President of Asia
05/20/2024 | GlobalFoundriesGlobalFoundries (GF) announced the appointment of industry and company veteran, Kay Chai (KC) Ang, as President of Asia and Chairman of China.