CyberOptics to Showcase High-Precision Inspection, Metrology Solutions at SEMI Technology Unites Global Summit
February 1, 2021 | CyberOptics CorporationEstimated reading time: 2 minutes
CyberOptics® Corporation, a leading global developer and manufacturer of high-precision 3D sensing technology solutions, will feature the WX3000TM metrology and inspection system with MRSTM sensor technology, and high-precision sensors for semiconductor tool set-up and diagnostics at the Virtual SEMI Technology Unites Global Summit from February 15-19th.
Tim Skunes, VP of R&D at CyberOptics, will share a related technical presentation ‘Fast, 100% 3D Wafer Bump Metrology and Inspection to Improve Yields and 3D System Integration’ on February 16th.
As the processes and features they create have become smaller and more complex, manufacturers face an increasing need for high-precision inspection and measurement to detect defects and improve process control. This need is amplified by the fact that these processes use expensive known good die, making the cost of failure extremely high.
The NanoResolution MRS sensor integrated into CyberOptics’ WX3000TM system provides sub-micrometer accuracy on features as small as 25?m. While retaining its ability to reject spurious multiple reflections, it adds the ability to capture and analyze specular reflections from shiny surfaces of solder balls, bumps and pillars, allowing highly accurate inspection and 3D metrology of these critical packaging features. Complete 100% 3D/2D inspection and bump metrology can be accomplished vs. time-consuming alternative methods that require separate scans for 3D and 2D, or a sampling only approach. With data processing speeds in excess of 75 million 3D points per second, it delivers production-worthy throughput greater than 25 wafers (300mm) per hour, at speeds 2- 3X faster.
“Whether it’s for the back-end or mid-end of the semiconductor fab, our proprietary sensors and systems deliver significant benefits to customers in terms of improved yields, processes and productivity,” said Dr. Subodh Kulkarni, President and CEO, CyberOptics, “Compared to other solutions, our technology saves our customers significant time and expense.”
Advanced Packaging (AP) and wafer level packaging (WLP) continue to be among the most dynamic and rapidly evolving areas of semiconductor development and manufacturing.
The company will also digitally demonstrate high-precision sensors that process and equipment engineers use in the front-end of the fab to speed equipment qualification, shorten equipment maintenance cycles, lower equipment expenses and optimize preventative maintenance plans. The WaferSense® Auto Resistance SensorTM (ARS) enables real-time resistance measurements of plating cell contacts in semiconductor Electrochemical Deposition (ECD) applications, and the
In-Line Particle SensorTM (IPS) detects, monitors and enables troubleshooting of particles down to 0.1 ?m in gas and vacuum lines in any areas of the fab 24/7.
The Technology Unites Global Summit brings together the global microelectronics supply chain, manufacturers and end users for a digital experience featuring industry thought leaders and high-value technical content from around the world. CyberOptics is a platinum sponsor.
Suggested Items
Indium Corporation to Present, Exhibit at EPP InnovationsFORUM
03/28/2024 | Indium CorporationIndium Corporation is set to present and exhibit at EPP InnovationsFORUM, one of Europe’s premier single-day electronics manufacturing forums, on April 17 in Leinfelden-Echterdingen, Germany. Topic areas for 2024 will include AI, automation, sustainability, and quality.
Reducing Nitrogen Consumption in Convection Soldering with Rehm Thermal Systems' Patented Mechatronic Curtain
03/28/2024 | Rehm Thermal SystemsCurrent developments indicate a need for larger throughput heights due to the trend towards e-mobility, which in turn increases nitrogen consumption for process inertization. Rehm Thermal Systems responds to this issue with an innovative solution: the mechatronic curtain.
Indium Corporation, Industry Partners to Showcase Products “Live@APEX”
03/26/2024 | Indium CorporationIndium Corporation®, in cooperation with its industry partners, will feature its proven solder solutions live on the show floor throughout IPC APEX Expo from Apr. 9‒11 in Anaheim, Calif., U.S.
ITW EAE Wins New Product Introduction Award for Electrovert® Wave Soldering Machine Deep Wave
03/26/2024 | ITW EAEITW EAE is proud to announce that it has earned a 2024 New Product Introduction (NPI) Award for Electrovert’s Deep Wave option for wave soldering machines. This new, innovative system provides the ability to pump up to a 20 mm wave height.
Mek's Next-Gen AOI Technology Takes Center Stage at IPC APEX EXPO 2024
03/19/2024 | MEKMek is excited to announce its presence at IPC APEX EXPO, North America's largest electronics manufacturing event, in Anaheim, California, from April 6-11, 2024. Attendees are invited to visit Mek at booth #1433 to explore the latest AOI technology offerings.