A Dissolvable Smartwatch Makes for Easier Electronics Recycling
August 6, 2021 | ACSEstimated reading time: 2 minutes
Small electronics, including smartwatches and fitness trackers, aren’t easily dismantled and recycled. So when a new model comes out, most users send the old devices into hazardous waste streams. To simplify small electronics recycling, researchers reporting in ACS Applied Materials & Interfaces have developed a two-metal nanocomposite for circuits that disintegrates when submerged in water. They demonstrated the circuits in a prototype transient device — a functional smartwatch that dissolved within 40 hours.
Planned obsolescence and the fast pace of technology innovations leads to new devices that are continuously replacing old versions, which generates millions of tons of electronic waste per year. Recycling can reduce the volume of e-waste and is mandatory in many places. However, it often isn’t worth the effort to recycle small consumer electronics because their parts must be salvaged by hand, and some processing steps, such as open burning and acid leaching, can cause health issues and environmental pollution. Dissolvable devices that break apart on demand could solve both of those problems. Previously Xian Huang and colleagues developed a zinc-based nanocomposite that dissolved in water for use in temporary circuits, but it wasn’t conductive enough for consumer electronics. So, they wanted to improve their dissolvable nanocomposite’s electrical properties while also creating circuits robust enough to withstand everyday use.
The researchers modified the zinc-based nanocomposite by adding silver nanowires, making it highly conductive. Then, they screen-printed the metallic solution onto pieces of poly(vinyl alcohol) — a polymer that degrades in water — and solidified the circuits by applying small droplets of water that facilitate chemical reactions and then evaporate. With this approach, the team made a smartwatch with multiple nanocomposite-printed circuit boards inside a 3D printed poly(vinyl alcohol) case. The smartwatch had sensors that accurately measured a person’s heart rate, blood oxygen levels and step count, and sent the information to a cellphone app via a Bluetooth connection. The outer package held up to sweat, but once the whole device was fully immersed in water, both the polymer case and circuits dissolved completely within 40 hours. All that was left behind were the watch’s components, such as an organic light-emitting diode (OLED) screen and microcontroller, as well as resistors and capacitors that had been integrated into the circuits. The researchers say the two-metal nanocomposite can be used to produce transient devices with performance matching that of commercial models, which could go a long way toward solving the challenges of small electronics waste.
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics
04/24/2024 | I-Connect007 Editorial TeamIn our fast-changing, deeply competitive, and margin-tight industry, factory analytics can be the key to unlocking untapped improvements to guarantee a thriving business. On top of that, electronics manufacturers are facing a tremendous burden to do more with less. If you don't already have a copy of this book, what follows is an excerpt from the introduction chapter of 'The Printed Circuit Assembler’s Guide to... Factory Analytics: Unlocking Efficiency Through Data Insights' to whet your appetite.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Winner of The Science Show Rakett 69 Receives Incap Scholarship
04/24/2024 | IncapThe winner of the Rakett 69 science show, Andri Türkson, who stood out as an electronics enthusiast, received a scholarship from Incap Estonia, along with an internship opportunity in Saaremaa.
Alternative Manufacturing Inc. Awarded QML Requalification to IPC J-STD-001 and IPC-A-610
04/24/2024 | IPCIPC's Validation Services Program has awarded an IPC J-STD-001 and IPC-A-610 Qualified Manufacturers Listing (QML) requalification to Alternative Manufacturing Inc (AMI).
Boeing's Janene Stinson Earns IPC Excellence in Education Award at IPC APEX EXPO 2024
04/22/2024 | IPCThe IPC Excellence in Education award was presented to Janene Stinson, Boeing, at IPC APEX EXPO 2024 in Anaheim, California, in recognition of her significant contributions to workforce development and leadership.