Cadence Extends Battery Life, Improves User Experience for Next-Generation Devices
October 29, 2021 | Cadence Design Systems, Inc.Estimated reading time: 3 minutes
Cadence Design Systems, Inc. announced the Cadence® Tensilica® HiFi 1 DSP, which improves the user experience by delivering breakthrough audio/voice innovation for small battery devices such as TWS earbuds, hearing aids, Bluetooth headsets, smart watches and other wearables. The HiFi 1 DSP’s ultra-low energy consumption extends the duration of voice communication and music playback, allowing always listening to voice commands with minimal impact to battery life. This enables small form factor, low-cost consumer and mobile devices, as well as automotive and industrial devices, to offer increased functionality with low energy consumption.
A number of converging trends are driving the need for low-energy audio/voice capabilities in a small form factor. Increasingly, hearables and wearables are adopting the Low Complexity Communications Codec (LC3) standardized by the Bluetooth Special Interest Group (SIG) in 2020. In addition, consumer preference for hands-free and touch-free control is driving demand for always-on, or always-listening, devices that respond to voice wake-up commands, and appliances are even adopting these capabilities. Finally, to enable these devices and applications, a small form factor and longer battery life are crucial.
“The Low Complexity Communication Codecs (LC3 and LC3plus) co-invented by Fraunhofer help minimize energy consumption for battery-constrained Bluetooth devices. Fraunhofer and Cadence have a long history partnering on various codecs including LC3/LC3plus, which Cadence has optimized on its Tensilica HiFi DSPs,” said Manfred Lutzky, Head of Audio for Communications department at Fraunhofer IIS. “We’re pleased to see them building upon that experience with the new HiFi 1 DSP that is energy- and cycle-optimized for LC3 and LC3plus. The HiFi 1 DSP embodies the codec’s unprecedented ultra-low energy levels, which should bring relief to small battery hearable and wearable devices with added features and help accelerate the widespread adoption of LC3 and LC3plus.”
The HiFi 1 DSP delivers ultra-low energy encoding and playback of LC3 and other Bluetooth codecs and ultra-low energy keyword spotting for voice wake-up, all in the smallest footprint HiFi DSP. Compared to the HiFi 3 DSP, the most popular audio DSP in the industry for the target applications, the HiFi 1 DSP offers:
- 11 to 16% lower area
- 60 to 73% greater cycle and energy efficiency for ML-based “OK Google” keyword spotting and person detect applications
- Greater than 18% cycle efficiency and 14% energy efficiency for LC3 decoding
“The HiFi 1 DSP from Cadence significantly lowers the energy required to run the always-on class of AI applications, such as the TensorFlow Lite Micro (TFLM) networks, speech wake word and person detect, enabling battery-constrained devices to run for longer lengths of time,” said Pete Warden, technical lead of TFLM at Google. “Cadence and Google have long collaborated on TFLM, and we are excited to continue the collaboration as Cadence pushes the boundaries of energy and performance further.”
HiFi 1 DSP Features and Benefits:
- Special instructions including arithmetic coding for LC3 encode and decode make the HiFi 1 DSP the most energy-efficient DSP for Bluetooth LE Audio
- Instructions for ITU-T3GPP-standardized 2019 BASOPs accelerate speech codecs and run them with high energy efficiency, increasing talk time
- Neural network ISA and load/store accelerate keyword spotting and other machine learning workloads for reduced energy consumption, while memory access-optimized ISA reduces improves performance with small cache sizes
- Efficient signal processing reduces energy and cycles for audio and speech pre- and post-processing
- Optional, low-latency vector floating point unit (VFPU) delivers higher FP throughput with lower energy consumption.
- Vector bool register improves energy efficiency for conditional code
“Intelligent context-aware, always-on processing is becoming key for next-generation hearables to offer users a better auditory experience with greater utility and convenience,” said Mike Demler, senior analyst at The Linley Group. “A blend of machine learning and traditional DSP algorithms is pervading these applications, yet battery life and form factor cannot be compromised. Cadence has established a strong leadership position with its widely adopted and supported Tensilica HiFi DSPs for audio, voice and speech applications. The new HiFi 1 DSP goes a step further by enabling these emerging target applications in a compact design—deftly melding AI, codec and DSP performance at ultra-low energy levels for energy-conscious designs.”
“HiFi DSPs enjoy wide adoption in current-generation TWS earbuds and Bluetooth headsets,” said David Glasco, vice president of research and development for Tensilica IP at Cadence. “The advent of LC3 and wider market trends set the stage for next-generation hearables to offer a superior user experience and longer battery life. With many speech and voice algorithms migrating towards AI, we’re also seeing vastly expanding use cases for analytics and better sound quality in TWS earbuds. The compact HiFi 1 DSP enables these new use cases with ultra-low energy consumption, bringing to the mass market always-on and always-listening capabilities that were until now the privilege of premium products.”
Suggested Items
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Ansys, TSMC Enable a Multiphysics Platform for Optics and Photonics, Addressing Needs of AI, HPC Silicon Systems
04/25/2024 | PRNewswireAnsys announced a collaboration with TSMC on multiphysics software for TSMC's Compact Universal Photonic Engines (COUPE). COUPE is a cutting-edge Silicon Photonics (SiPh) integration system and Co-Packaged Optics platform that mitigates coupling loss while significantly accelerating chip-to-chip and machine-to-machine communication.
Siemens’ Breakthrough Veloce CS Transforms Emulation and Prototyping with Three Novel Products
04/24/2024 | Siemens Digital Industries SoftwareSiemens Digital Industries Software launched the Veloce™ CS hardware-assisted verification and validation system. In a first for the EDA (Electronic Design Automation) industry, Veloce CS incorporates hardware emulation, enterprise prototyping and software prototyping and is built on two highly advanced integrated circuits (ICs) – Siemens’ new, purpose-built Crystal accelerator chip for emulation and the AMD Versal™ Premium VP1902 FPGA adaptive SoC (System-on-a-chip) for enterprise and software prototyping.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.