WiMi Develops 3D Holographic LiDAR Diffuse Reflection Target Detection Chip to Fix Point Cloud Data Bias
May 9, 2023 | PRNewswireEstimated reading time: 3 minutes
WiMi Hologram Cloud Inc., a leading global Hologram Augmented Reality (AR) Technology provider, announced that it developed a coherent 3D holographic LiDAR diffuse target detection chip for solving technical defects of diffuse reflection generated from the continuous development and industry applications of LiDAR as WiMi's leading 3D holographic LiDAR technology has been applied in many unmanned and consumer electronics products.
The surfaces of many objects look relatively smooth, but in reality, they are not flat and messy under magnification. Rough surfaces cause light to reflect irregularly in all directions. LiDAR systems typically use laser pulses to scan and measure holographic 3D point locations in space relative to the sensor. LiDAR systems can naturally emit thousands or tens of thousands of laser pulses per second, creating a holographic 3D data point cloud. The diffuse reflection can lead to some deviation of the holographic 3D point cloud data, resulting in inaccurate or even misjudged results, which is the diffuse reflection problem of the LiDAR system.
3D holographic LiDAR uses a pulsed laser with time feedback or solid-state light to measure the point cloud space to reflect the object's spatial location. 3D holographic LiDAR system characterization requires that the pulsed or solid-state level of the sensor can be adjusted to compensate for diffuse reflections within a fuzzy emissivity dynamic range, which is the compensation adjustment of spectral reflectance data in complex environment characterization. It contains a series of complex algorithms such as power compensation of LiDAR, point cloud data gain, and noise reduction. If LiDAR does not have a well-designed processing system, it can easily lead to many obvious noise points in the LiDAR point cloud when intense light interferes. At the same time, the special diffuse reflection of particular objects also has the property of absorbing light waves, which will also produce great point cloud data voids.
WiMi's coherent 3D holographic LiDAR diffuse reflection target detection chip allows for spectral reflectance data judgments. The chip enables characterization confirmation of objects with different reflectance under complex environmental conditions through algorithms. Then combined with the calibrated spectral reflectance data, the precisely calibrated spectral reflectance allows accurate measurement of LiDAR range and minimizes diffuse target interference.
WiMi is doing further technology validation, hoping that the technology can assist the 3D holographic LiDAR system solve some problems. For example, LiDAR emits a pulse in the trailing effect and returns under normal circumstances. However, in practical applications, the pulse signal has a certain divergence angle, and the pulse often hits two items in front and behind, forming two echoes, leading to erroneous distance discrimination. The point cloud data is calibrated by analyzing this point cloud through complex spectral reflectance data to create an accurate mapping of the target area. In addition, the interference of point cloud data by highly reflective objects has been a technical challenge for LiDAR. When LiDAR scans a highly reflective object, the output point cloud data may form another object of similar size and shape at other locations besides the actual location due to the specular emission effect of the highly reflective object, which causes a bad mirror image in the point cloud data. WiMi hopes to solve these problematic problems plaguing LiDAR with the algorithm of a coherent 3D holographic LIDAR diffuse target detection chip.
3D holographic LiDAR has a wide range of applications in the future, and many technologies need to be improved gradually. There are many opportunities for innovative applications. Traditional LiDAR has been popularized in the primary stage of autonomous driving (for example, the adaptive cruise control system of cars), which used to be equipped only in high-end vehicles. Now it is almost standard in most cars, and the maturity of the technology means enormous market space. 3D holographic LiDAR can accurately give feedback on spatial position and relative distance information. Thus, it can detect various objects and perform spatial 3D holographic point cloud data imaging. Not only in autonomous driving, but 3D holographic LiDAR can also be applied in terrain modeling, spatial measurement, disaster warning, and many other fields. Suppose 3D holographic LiDAR combines XR technology, IoT, geolocation, AI, machine learning, and advanced networks. In that case, more new industry applications may be born, so in the future, 3D holographic LiDAR technology still has a lot of room for technological progress and a broad application market.
Suggested Items
Warm Windows and Streamlined Skin Patches – IDTechEx Explores Flexible and Printed Electronics
04/26/2024 | IDTechExFlexible and printed electronics can be integrated into cars and homes to create modern aesthetics that are beneficial and easy to use. From luminous car controls to food labels that communicate the quality of food, the uses of this technology are endless and can upgrade many areas of everyday life.
iNEMI Packaging Tech Topic Series: Role of EDA in Advanced Semiconductor Packaging
04/26/2024 | iNEMIAdvanced semiconductor packaging with heterogenous integration has made on-package integration of multiple chips a crucial part of finding alternatives to transistor scaling. Historically, EDA tools for front-end and back-end design have evolved separately; however, design complexity and the increased number of die-to-die or die-to-substrate interconnections has led to the need for EDA tools that can support integration of overall design planning, implementation, and system analysis in a single cockpit.
Koh Young Showcases Award-winning Inspection Solutions at SMTconnect with SmartRep in Hall 4A.225
04/25/2024 | Koh Young TechnologyKoh Young Technology, the industry leader in True 3D measurement-based inspection solutions, will showcase an array of award-winning inspection and measurement solutions at SMTconnect alongside its sales partner, SmartRep, in booth 4A.225 at NürnbergMesse from June 11-13, 2023. The following offers a glimpse into what Koh Young will present at the tradeshow:
Real Time with… IPC APEX EXPO 2024: Plasmatreat: Innovative Surface Preparation Solutions
04/25/2024 | Real Time with...IPC APEX EXPOIn this interview, Editor Nolan Johnson speaks with Hardev Grewal, CEO and president of Plasmatreat, a developer of atmospheric plasma solutions. Plasmatreat uses clean compressed air and electricity to create plasma, offering environmentally friendly methods for surface preparation. Their technology measures plasma density for process optimization and can remove organic micro-contamination. Nolan and Hardev also discuss REDOX-Tool, a new technology for removing metal oxides.
Nanotechnology Market to Surpass $53.51 Billion by 2031
04/25/2024 | PRNewswireSkyQuest projects that the nanotechnology market will attain a value of USD 53.51 billion by 2031, with a CAGR of 36.4% over the forecast period (2024-2031).