Keysight Introduces PathWave ADS 2024 to Accelerate 5G mmWave Design, Pioneer 6G Development
June 16, 2023 | Keysight TechnologiesEstimated reading time: 3 minutes
Keysight Technologies, Inc. introduces PathWave Advanced Design System (ADS) 2024, an electronic design automation (EDA) software suite giving chip designers new millimeter wave (mmWave) and subterahertz (sub-THz) frequency capabilities that accelerate 5G mmWave product design and anticipate requirements for 6G wireless communications development.
Developers of 5G and non-terrestrial network components are creating next-generation radio front-end modules using mmWave frequency bands that present significant design and simulation challenges. These frequencies are prone to signal loss due to propagation characteristics, atmospheric attenuation, complex packaging issues, and noise and dynamic range problems. Designing for 6G poses even greater challenges with sub-THz signals operating at higher frequencies.
Monolithic microwave integrated circuits (MMIC) and module designers are combining multiple semiconductor and III-V processes at mmWave frequencies, which requires multiple die assembly, module level interconnection, and power considerations. mmWave power amplifiers are built separately from the rest of the design to mitigate heat, yield, and semiconductor performance issues. In addition, power amplifiers developed in gallium nitride processes handle higher current densities than silicon.
New semiconductor packaging techniques, such as flip chip bonding, achieve higher densities and performance. These packages also require co-design across multiple technologies and processes because they concentrate challenges with internal crosstalk, electromagnetic interference (EMI), stability, and operating temperature.
The latest version of Keysight's industry-leading radio frequency and microwave (RF/uW) design software suite addresses these development pain points with algorithm, layout, electro-thermal, and workflow automation enhancements.
New PathWave ADS 2024 design capabilities include:
- Faster second-generation 3D-EM and 3D-Planar meshing and solvers – Delivers algorithm enhancements taking superior advantage of domain knowledge about microwave structures and processes. Mesh optimization and layout and connectivity improvements reduce problem sizes for faster simulations. Solver enhancements also speed simulation by up to 10 times and require less specialized user expertise over a wider range of problems, including mmWave design at automotive radar frequencies of 79GHz. Open workflows save database management and reduce overhead from iterative, manual setup.
- Advanced layout and verification features – Enables design sign-off directly from ADS for LVS, LVL, DRC, and ERC for MMICs, as well as streamline productivity for module and multi-technology assembly. Wavetek is the latest foundry to fully support ADS for an end-to-end workflow.
- Electrothermal enhancements accelerate validation – Drives higher reliability and higher operating performance with validation of dynamic device operating temperatures under different bias and waveform conditions. Supports high-performance compute acceleration and up to 100 times transient speed-up using W3051E Electrothermal Dynamic Re-use, enabling higher test plan coverage and earlier insights in the design phase.
- Custom workflow support with expanded Python APIs – Increases flexibility and scalability. A load-pull data import utility, ANN modeling, and Python automation scripting for 5G power amplifier designers unlock new application potential to create targeted personalities of ADS.
Doug Jorgesen, Vice President of Applications, Marki Microwave, said: "We use PathWave ADS for our mmWave power amplifier designs because it is a complete integrated solution that gives us simulation models, layout tools, and the accuracy we need to ensure first pass success. ADS has a unique Winslow Probe stability analysis capability that enables us to optimize our amplifier designs with confidence. Our simulations closely match our lab measurements, so we avoid expensive prototype re-spins on our designs. ADS is our preferred tool for power amplifier design."
Joe Civello, PathWave ADS Product Manager at Keysight, said: "Traditional RF/uW EDA workflows involve a variety of specialized solvers that require database transfers, deep domain knowledge, and familiarity with multiple environments. We've added more speed and performance to ADS electromagnetic (EM) meshing and solving algorithms to improve sweeping coverage through parameters like process variations and layout effects. RFPro in PathWave ADS 2024 streamlines workflows into a unified circuit-EM co-design cockpit where circuit designers can now perform EM simulation to tune and optimize designs early in the development cycle. ADS supports multi-technology design and analysis of thermal, EM, and layout parasitics on circuits and signal modulation. It enables rapid assembly of circuits, MMICs, packaging, interconnects, and module layouts to significantly improve mmWave engineering productivity."
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
05/03/2024 | Nolan Johnson, I-Connect007This week’s most important news is strategic—and telling. When one puts together the IPC industry reports, we simply have to include the recent conversation with Shawn DuBravac and Tom Kastner. On the design side, check out the latest “On The Line With…” podcast featuring Brad Griffin from Cadence Design Systems, discussing SI and PI in the realm of intelligent system design.
Synopsys, Samsung Electronics Collaborate to Achieve First Production Tapeout of Flagship Mobile CPU
05/03/2024 | PRNewswireSynopsys, Inc. announced that Samsung Electronics has achieved successful production tapeout for its high-performance mobile SoC design, including flagship CPUs and GPUs, with 300MHz higher performance using Synopsys.ai™ full stack AI-driven EDA suite and a broad portfolio of Synopsys IP on Samsung Foundry's latest Gate-All-Around (GAA) process technologies.
Altair Acquires Research in Flight, Forging a New Path for Aerodynamic Analysis
05/03/2024 | AltairAltair a global leader in computational intelligence, announced it has acquired Research in Flight, maker of FlightStream®, which provides computational fluid dynamics (CFD) software with a large footprint in the aerospace and defense sector and a growing presence in marine, energy, turbomachinery, and automotive applications.
Real Time with… IPC APEX EXPO 2024: Software Solutions for Circuit Board Challenges
05/03/2024 | Real Time with...IPC APEX EXPONolan Johnson speaks with Will Webb from Aster Technologies about their software solutions for design teams, manufacturing, test engineers, and process engineers. Aster's software addresses the increasing complexities of circuit boards and the need for alternative testing methods.
Real Time with… IPC APEX EXPO 2024: My Role as a Technology Solutions Director
05/02/2024 | Real Time with...IPC APEX EXPOPeter Tranitz, senior director of technology solutions at IPC, shares insights into his role as the design initiative lead. He details his advocacy work, industry support, and the responsibilities of the design initiative committee. The conversation also covers the revamping of standards, the IPC Design Competition, and the implementation of design rules in software tools.