Lean vs. TQM vs. Six Sigma
August 2, 2023 | Steve Williams, The Right Approach Consulting LLCEstimated reading time: 1 minute
Introduction
Lean, Total Quality Management (TQM), and Six Sigma are three popular methodologies used in business and manufacturing sectors to improve processes, increase efficiency, and reduce waste. While they share some similarities, each approach has its unique focus and tools. Here's a comparison of Lean, TQM, and Six Sigma.
The Founding Fathers
Companies like Toyota are often touted (with good reason) as the gold standard for quality system models. Toyota’s TPS (Toyota Production System) has been highly publicized and has gained increasing acceptance in American manufacturing operations over the last decade or so. What has not been highly publicized is the fact that many of these concepts originated in America, and quality pioneers like W. Edwards Deming had to take their show on the road to Japan only after being rejected by the leaders of American industry. The contributions of such legends as Dr. Deming, Dr. Joseph Juran, Philip Crosby, Dr. Kaoru Ishikawa, Dr. Walter Shewhart, and Shigeo Shingo had such an impact on the world that they truly are the Founding Fathers of modern quality.
“We strive to decide our own fate. We act with self-reliance, trusting in our own abilities. We accept responsibility for our conduct and for maintaining and improving the skills that enable us to produce added value.”
–Excerpt from Toyota Motor Corporation’s internal document, “Toyota Way”
Lean
Lean is a methodology and philosophy that originated from the Toyota Production System (TPS) and is widely used in various industries for process improvement and waste reduction. The core principle of Lean is to maximize value for customers by minimizing or eliminating non-value-added activities or waste. The primary focus of Lean is on creating flow and eliminating waste throughout the entire value stream, from the beginning of a process to its end. Waste, also known as "Muda" in Lean terminology, refers to any activity or process step that does not add value from the customer's perspective. Figure 1 illustrates the eight types of wastes identified in Lean Manufacturing.
To read this entire article, which appeared in the July 2023 issue of PCB007 Magazine, click here.
Suggested Items
QinetiQ Achieves UK’s First Jet-to-Jet Teaming Between Aircraft and Autonomous Drone
04/29/2024 | QinetiQQinetiQ has successfully trialled the UK’s first Crewed-Uncrewed-Teaming demonstration between a crewed aircraft and an autonomous jet drone.
Lockheed Martin Australia, The Department Of Defence Sign Strategic Partnership Head Contract
04/26/2024 | Lockheed MartinLockheed Martin Australia signed a landmark AUD$500 million contract with the Department of Defence to build Australia’s future Joint Air Battle Management System under project - AIR6500 Phase 1 (AIR6500-1).
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Siemens’ Breakthrough Veloce CS Transforms Emulation and Prototyping with Three Novel Products
04/24/2024 | Siemens Digital Industries SoftwareSiemens Digital Industries Software launched the Veloce™ CS hardware-assisted verification and validation system. In a first for the EDA (Electronic Design Automation) industry, Veloce CS incorporates hardware emulation, enterprise prototyping and software prototyping and is built on two highly advanced integrated circuits (ICs) – Siemens’ new, purpose-built Crystal accelerator chip for emulation and the AMD Versal™ Premium VP1902 FPGA adaptive SoC (System-on-a-chip) for enterprise and software prototyping.
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.