One Step Towards Faster Organic Electronics
September 9, 2015 | Linköping UniversitetEstimated reading time: 2 minutes
For years we have believed that ordered polymer chains increase the conductivity of plastic. And a new generation of polymers has been developed. It is true that these new polymers are more conductive, but for completely different reasons – according to researchers from Linköping University and Stanford University, in an article in the highly ranked journal PNAS.
Organic electronics has many advantages: it is inexpensive, flexible and lightweight it does not consume any scarce resources. In terms of applications, we are only limited by our imaginations. There has been a lot of development in polymers since the phenomenon of conducting and semi-conducting plastics was discovered and in 2000 awarded a Nobel Prize. Their weakness is still speed; plastics conduct a charge slowly, compared to silicon, for instance.
A polymer consists of long chains of hydrocarbon, where other elements are bound, which give the particular plastic its properties. Research is underway, and researchers and developers in the chemical industry have developed new polymers that conduct better.
”The charge is transported two to three times faster in the latest generation polymers,” explains Dr Simone Fabiano, researcher at the Laboratory of Organic Electronics, Linköping University, Campus Norrköping. He is the lead author of the article being published in the Proceedings of the National Academy of Sciences, PNAS.
Until now people have tried to get the polymer chains to lie as well ordered as possible. The idea is that it should be easy for the charge to jump between the chains if they are organised in rows. Dr Fabiano compares the polymer chains to spaghetti, that you try to line up next to each other, instead of all tangled up, like when it has been tipped from a pot.
But to their surprise, the researchers observed during their experiments that the charge seems to travel as quickly in an unordered polymer as in an ordered, crystalline one.
Together with colleagues at the Laboratory of Organic Electronics in Norrköping and in Stanford, California, Dr Fabiano has discovered why this occurs. They have shown that crystallinity, the degree of structural order in a solid, actually does not play a part in how quickly a polymer conducts.
”We see that the new generation of polymers has such small defects that the charge moves faster along the chain instead of jumping between the chains. For the charge carrier, it takes less energy to travel along the chain than to jump to the adjacent one. So the polymer is a faster conductor,” explains Simone Fabiano.
Instead, the ideal situation seems to be that the polymer has some a degree of disorder and that the polymer chains aggregate from time to time, that is, they cross each other, to make the transition easier.
To further increase conductivity in the conducting and semiconducting polymers, and to develop faster electronic components, Dr Fabiano now places his hope on the chemists.
”It is about design at the molecular level. That they can continue to reduce the defects and focus on enabling the polymer chains to make better contact with each other, rather than forming large crystalslying in order.”
Suggested Items
TTM’s High Tech Expansion and Industry Innovation
04/30/2024 | Marcy LaRont, PCB007 MagazineTom Edman has been the CEO of TTM Technologies since 2014 and has an extensive background in electronics and manufacturing. TTM is a leading global manufacturer of technology solutions, including mission systems, RF component and RF microwave microelectronics assemblies, and quick turn and advanced technology printed circuit boards.
Latest Test and Inspection Solutions from GOEPEL electronic at SMTconnect 2024
04/29/2024 | GOEPEL electronicGOEPEL electronic will be demonstrating automated test and inspection equipment at SMTconnect, taking place in Nuremberg from June 11 to 13, 2024.
Arlon Electronic Materials Awarded Requalification to IPC-4101 QPL for All Polyimide Specification Sheets
04/29/2024 | IPCIPC's Validation Services Program has awarded Arlon Electronic Materials Division, an electronics material manufacturing company headquartered in Rancho Cucamonga, Calif., an IPC-4101 Qualified Products Listing (QPL) requalification for the third time.
Warm Windows and Streamlined Skin Patches – IDTechEx Explores Flexible and Printed Electronics
04/26/2024 | IDTechExFlexible and printed electronics can be integrated into cars and homes to create modern aesthetics that are beneficial and easy to use. From luminous car controls to food labels that communicate the quality of food, the uses of this technology are endless and can upgrade many areas of everyday life.
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics
04/24/2024 | I-Connect007 Editorial TeamIn our fast-changing, deeply competitive, and margin-tight industry, factory analytics can be the key to unlocking untapped improvements to guarantee a thriving business. On top of that, electronics manufacturers are facing a tremendous burden to do more with less. If you don't already have a copy of this book, what follows is an excerpt from the introduction chapter of 'The Printed Circuit Assembler’s Guide to... Factory Analytics: Unlocking Efficiency Through Data Insights' to whet your appetite.