Physicists Triple Pulse Energy of POLARIS Laser
February 22, 2016 | Institute of Optics and Quantum Electronics of the University of JenaEstimated reading time: 3 minutes
POLARIS is the world's most powerful fully diode-pumped laser system and with it, the University of Jena and the Helmholtz Institute Jena possess a petawatt-class laser, which produces the presently highest-performing laser pulses. A team of physicists under the leadership of Prof. Dr Malte Kaluza at the Institute of Optics and Quantum Electronics has now succeeded to once again improve POLARIS' performance significantly. For the first time, the laser has produced pulses delivering an energy of more than 50 Joule, which is more than three times as high as before.
Peak power of several hundred terawatts
50 Joule is the amount of energy needed to lift an object weighing 500 g approximately 10 m off the ground; to raise the temperature of a glass of water by only one degree, however, 17 times as much energy would be required. For a high-performance laser system like POLARIS, 50 Joule therefore seems rather meagre. "But our laser system delivers this amount of energy in a very short time interval," explains Prof. Kaluza. The laser pulses have a duration of 120 femtoseconds only. In this unimaginably brief moment - a femtosecond is one thousand-million-millionth of a second -, the laser reaches a peak power of several hundred terawatts (TW). This is many times higher than all the electrical power produced worldwide.
This increase in the laser system's performance is the result of several months of development. "The basic architecture and set-up of the laser have not changed," underlines Prof. Kaluza, "but we succeeded in changing and improving many small details decisively." The recent results and achievements were also made possible through a long-term cooperation with the local optics industry - in particular with the Jenoptik AG, with Lastronics GmbH, with Hellma Materials GmbH, and with Layertec GmbH -, who have provided some of the core components of the laser system. For example, the last and largest power amplifier of POLARIS now uses ytterbium-doped calcium fluoride crystals. And also the optical coating of the materials put under enormous stress by the laser radiation has been further optimized. "All these small changes together now allow us to reach a considerably higher laser energy than before," explains Kaluza. But the laser physicist also suggests that the 54.16 Joule reached now are far from being the finish line.
Tool for particle acceleration
As the next stage in the development, Kaluza, who also is the holder of the chair of experimental physics and relativistic laser physics, now plans to shorten the duration of pulses in the POLARIS system even further, the goal being to reduce the duration to no more than 100 femtoseconds. The steady reduction of the duration is, however, not a goal in itself. "We are not looking to always set new records," explains Kaluza. On the contrary, the objective is to make POLARIS available for specific uses. First and foremost, the laser is meant to be used as a tool for particle acceleration. "We have already conducted some first experiments in this field with lower pulse energy and longer laser pulses. Now we are excited to see how the particle energy will scale with the much higher laser energy and concurring shorter pulse duration."
Intense and highly energetic ion radiation can, for example, be used in tumour treatment. So far, the generation of these highly energetic particles required tremendous technical efforts in very large particle accelerators. "With the amount of energy we are now able to generate, we can offer laser systems like POLARIS for particle irradiation, which are comparatively 'easy to handle' and manageable. We are now curious to see to what particle energy we can now make it with the new laser pulses," says Prof. Kaluza.
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
05/03/2024 | Nolan Johnson, I-Connect007This week’s most important news is strategic—and telling. When one puts together the IPC industry reports, we simply have to include the recent conversation with Shawn DuBravac and Tom Kastner. On the design side, check out the latest “On The Line With…” podcast featuring Brad Griffin from Cadence Design Systems, discussing SI and PI in the realm of intelligent system design.
Industrial PC Market Size to Record $1.75 Billion Growth from 2023-2027
05/03/2024 | PRNewswireThe global industrial pc market size is estimated to grow by USD 1.75 billion from 2023 to 2027, according to Technavio. This growth is expected to occur at a Compound Annual Growth Rate (CAGR) of almost 6.29% during the forecast period.
Real Time with… IPC APEX EXPO 2024: Sigma Engineering's Recycling and Regeneration Systems for PCB Etching
05/02/2024 | Real Time with...IPC APEX EXPOEvan Howard of Schmoll America interviews Kristoffer Bjorklund, Sigma Engineering's supply chain manager. We learn about Sigma's recycling and regeneration systems for PCB industry etching and the benefits and challenges of implementing these systems in existing factories.
Boeing T-7A Red Hawk Triples Progress
05/01/2024 | BoeingThe Boeing T-7A Red Hawk achieved three recent milestones, propelling the advanced pilot trainer for the U.S. Air Force forward.
Merlin Flex invests in New Schmoll Direct Imaging System
04/30/2024 | Merlin Flex LtdMerlin Flex has fully installed and commissioned its 2nd Schmoll MDI Direct Imaging system. This new machine includes a twin bed, 4 head system which enhances Merlin Flex’s direct imaging capability for its 1.4M long flexible circuits.