Photopolymerization-triggered Molecular Motion for Flexible Liquid Crystal Display
November 14, 2017 | Tokyo Institute of TechnologyEstimated reading time: 3 minutes
Scientists at Tokyo Institute of Technology (Tokyo Tech) and McGill University have developed a new dye-free photoalignment method that enables 2D patterns of liquid crystals in one step by guiding nonpolarized light temporally and spatially on the photopolymerization process. This new method provides a pathway for the simple creation of highly functional organic materials such as flexible liquid crystal devices.
Figure 1. Schematic representations of photoirradiation for controlling molecular alignment.
Figure A represents the molecular alignment through conventional photoalignment methods. Figure B represents the molecular alignment achieved through the currently reported scanning wave photopolymerization method.
With current 2D techniques, one typically irradiates a liquid crystal film that contains added photoresponsive dye molecules, with uniform polarized light. This controls the net liquid crystal alignment via the interaction of the dye dipole and the polarization axis of light. The drawback with these systems is the need for adding strong dyes, which can discolor or degrade optical and stability properties. Thus, a dye-free method is highly desired in the engineering industry.
Currently, only two approaches to dye-free methods have been explored. The first is a two-step alignment method, in which the liquid crystal materials are coated over a very thin dye-containing photoalignment layer and then aligned or fixed by polymerization. While this method has proven very successful in achieving stimuli-responsive 2D aligned liquid crystals and elastomers used in photonics, solar energy harvesting, microfluidics, and soft-robotic devices, it is expensive and time-consuming. The creation of a film with microscopic arrays of microalignment patterns requires precise and dynamic control of the polarized direction of incident light in each pixel, so this method is unsuitable for aligning patterns on the nanoscale over large areas.
The second approach to the development of a dye-free system uses surface topography to overcome the limitations of conventional photoalignment. In this method, the liquid crystals are aligned over a surface topography template through lithography, nanoimprinting, or inkjet techniques among others. While this method allows for 2D micropatterning of molecular alignment, it still requires multi-step processing, making it costly and time-consuming. Due to the surface roughness from the topographic templates, this method proves difficult in the production of thin films.
A research group led by Atsushi Shishido at Tokyo Tech has reported the development of a new method of scanning wave photopolymerization that utilizes spatial and temporal scanning of focused guided light. As the polymerization reaction proceeds, a mass flow in the film is triggered, and this results in alignment of the liquid crystals with the incident light patterns. The desired alignment is achieved through a single step by light triggered mass flow.
This new method generates arbitrary alignment patterns with fine control over larger areas in a wide variety of liquid crystal materials without the need for strong dyes or additional processing steps, something that previous methods were unable to achieve. This method has the additional advantage of unlimited complexity in 2D patterns that would, in principal, only be restricted by the light diffraction limits.
This new concept of scanning wave photopolymerization is currently limited to photopolymerizable liquid crystal systems with a thickness below tens of micrometers. However, further investigation can expand material systems that could be used such as nanorods, nanocarbons, and proteins. Scanning wave photopolymerization can be readily introduced into existing photoproduction facilities, allowing for great economic advantages. The scientists at Tokyo Institute of Technology see this method as a powerful pathway for the simple creation of highly functional organic materials with arbitrary, fine molecular alignment patterns on the nanoscale over large areas.
Figure 2. Arbitrary alignment patterns generated by spatial and temporal scanning of light.
Figure A represents a schematic illustration of the desired patterns of alignment. Figure B represents irradiated light patterns of expanding toroid shapes, periodic dots, and the words Tokyo Tech. Figure C represents POM images under crossed polarizers.
Suggested Items
D Coupon Testing and Data Insights With GreenSource Fabrication
04/17/2024 | Marcy LaRont, PCB007 MagazineMarcy LaRont spoke with Steve Karas of GreenSource Fabrication at the SMTA UHDI conference in March. He presented a case study that GreenSource undertook with a customer on critical via reliability with advanced materials and used the experience to highlight the importance and effectiveness of D coupon testing. He also discussed GreenSource’s approach to data aggregation and a new system they developed to use collected data effectively.
Real Time with... IPC APEX EXPO 2024: Exploring Silicone Solutions with R&D Director of CHT
04/17/2024 | Real Time with...IPC APEX EXPOIn this interview, Gerry Ellis, the R&D director for CHT, discusses the product range offered by his company. He explains the challenges in creating base formulations, the drive to make products more user-friendly, and the various application techniques involved. Ellis also highlights the key market segments and the significance of providing efficient solutions to customers.
The World of Electronics and Standards: A Conversation with Frank Honyotski, STI
04/03/2024 | Marcy LaRont, PCB007 MagazineMarcy LaRont of I-Connect007 speaks with Frank Honyotski of STI Electronics, who discusses the services offered by STI, including training, engineering, and failure analysis. He highlights his involvement with IPC standards development and emphasizes the importance of industry professionals engaging in standards development.
Demand Rebounds, Global LED Industry Revenue Expected to Grow 3% in 2024 with Market Focus on Automotive Displays
04/01/2024 | TrendForceTrendForce’s latest LED industry report indicates that the global market is set to recover in 2024, with estimated revenues reaching US$13 billion—marking a YoY growth of 3%.
Orbex Secures Patent for 'Petal Fold' Reusable Rocket Technology
03/29/2024 | OrbexOrbex has successfully patented its REFLIGHT reusable rocket technology following patent approval in several European markets, based on the patent grant by the European Patent Office, as well as in the United States.