Printable Version Polymer Nanocarpets to Electrify Smart Fabrics
April 19, 2018 | Tomsk Polytechnic UniversityEstimated reading time: 2 minutes
Researchers from Tomsk Polytechnic University together with their international colleagues have discovered a method to modify the ultra-thin conductor of current and heat graphene without destroying it. Thanks to the novel method the researchers were able to synthesize on graphene samples of a well-structured polymer with a strong covalent bond, which they called ‘polymer carpets’. The entire structure is highly stable; it is less prone to degradation over the time that makes the study promising for the development of organic flexible electronics. In addition, if a layer of molybdenum disulphide is added over the ‘nanocarpet’, the resulting structure generates current under exposure to light. The study results were published in Journal of Materials Chemistry C.
The scheme for obtaining a hybrid structure of "graphene-polymer"
Graphene is simultaneously the most durable, light and an electrically conductive carbon compound. It can be used for manufacturing solar batteries, smartphone screens, thin and flexible electronics, and even in water filters since graphene films pass water molecules and stop all other compounds. Graphene should be integrated into complex structures to be used successfully. However, it is a challenge. According to scientists, graphene itself is stable enough and reacts poorly with other compounds. In order to react it with other elements, i.e. to modify it, graphene is destroyed. This affects the properties of the materials obtained.
Professor Raul Rodrigez from the Research School for Chemistry & Applied Biomedical Sciences says: ‘When destroying graphene, you should be very careful. If you overdo, the unique properties of graphene are lost. Therefore, we decided to follow a different path.
In graphene, there are inevitable nanodefects, for example, at the junction of faces. Hydrogen atoms are often attached to such defects. It is this hydrogen that can interact with other elements.’
To modify graphene, the authors use a thin metal substrate on which a graphene layer is placed. Then graphene is covered with the solution of bromine-polystyrene molecules. The molecules interact with hydrogen and are attached to the existing defects, resulting in polyhexylthiophene (P3HT). Further exposed to light during the photocatalysis, a polymer begins to ‘grow’.
‘In the output we obtained the samples which structure resembles ‘polymer carpets’ as we name then in the paper. Above such a ‘polymer carpet’ we place molybdenum disulphide.
Due to a unique combination of materials, we obtain ‘sandwich’ structure’ that functions like a solar battery. That is, it generates current exposed to light.
In our experiments a strong covalent bond is established between the molecules of the polymer and graphene, that is critical for the stability of the material obtained,’ notes Rodrigez.
According to the researcher, the method for graphene modification, on the one hand, enables to obtain a very strong compound, on the other hand, it is rather simple and cheap as affordable compounds are used. The method is versatile because it makes it possible to react graphene with very different polymers.
‘The strength of the obtained compound is achieved additionally because of that we do not destroy graphene itself and use existing defects, and a strong covalent bond between polymer molecules. This allows us to consider the study as promising for the development of thin and flexible electronics, when solar batteries can be attached to clothes, and when deformed they will not break down,’ the professor explains.
Suggested Items
D Coupon Testing and Data Insights With GreenSource Fabrication
04/17/2024 | Marcy LaRont, PCB007 MagazineMarcy LaRont spoke with Steve Karas of GreenSource Fabrication at the SMTA UHDI conference in March. He presented a case study that GreenSource undertook with a customer on critical via reliability with advanced materials and used the experience to highlight the importance and effectiveness of D coupon testing. He also discussed GreenSource’s approach to data aggregation and a new system they developed to use collected data effectively.
Real Time with... IPC APEX EXPO 2024: Exploring Silicone Solutions with R&D Director of CHT
04/17/2024 | Real Time with...IPC APEX EXPOIn this interview, Gerry Ellis, the R&D director for CHT, discusses the product range offered by his company. He explains the challenges in creating base formulations, the drive to make products more user-friendly, and the various application techniques involved. Ellis also highlights the key market segments and the significance of providing efficient solutions to customers.
The World of Electronics and Standards: A Conversation with Frank Honyotski, STI
04/03/2024 | Marcy LaRont, PCB007 MagazineMarcy LaRont of I-Connect007 speaks with Frank Honyotski of STI Electronics, who discusses the services offered by STI, including training, engineering, and failure analysis. He highlights his involvement with IPC standards development and emphasizes the importance of industry professionals engaging in standards development.
Demand Rebounds, Global LED Industry Revenue Expected to Grow 3% in 2024 with Market Focus on Automotive Displays
04/01/2024 | TrendForceTrendForce’s latest LED industry report indicates that the global market is set to recover in 2024, with estimated revenues reaching US$13 billion—marking a YoY growth of 3%.
Orbex Secures Patent for 'Petal Fold' Reusable Rocket Technology
03/29/2024 | OrbexOrbex has successfully patented its REFLIGHT reusable rocket technology following patent approval in several European markets, based on the patent grant by the European Patent Office, as well as in the United States.