BAE Systems Partners With Rusi on Cyber Security Research Programme
September 5, 2019 | ABI ResearchEstimated reading time: 3 minutes
Ranked as the top manufacturing simulation software vendor, Siemens scored highest in implementation and topped four of the ten scoring criteria, states global tech market advisory firm, ABI Research. Dassault Systèmes came in a close second, having scored the highest in innovation and topped three of the ten criteria.
The Manufacturing Simulation Software Competitive Assessment analyzed and ranked seven major vendors in the industry - Siemens, Dassault Systèmes, Arena (Rockwell Automation), AnyLogic, FlexSim, Simio, and Simul8 – using ABI Research’s proven, unbiased innovation/implementation criteria framework. For this competitive assessment, innovation scores examined the technical capabilities of the vendor’s software and implementation scores focused on the vendor’s commercial ability to deliver their solution around the world across a variety of manufacturing verticals.
A key judgment criterion within the innovation category was digital twin capability, the software’s ability to align end-to-end physical processes with a dynamic digital representation that provides two-way feedback and ongoing optimization. Vendors were also judged according to data ingestion, the software’s ability to utilize high volumes of real-time data from a variety of sources, including industrial equipment and sensors on the factory floor. Further assessment included UX, data modeling and analytics, and virtual commissioning capabilities.
ABI Research chose these vendors for the assessment due to their simulation capabilities in discrete manufacturing specifically, where software is used to simulate physical processes digitally to optimize engineering, planning, and operations on the factory floor.
Siemens scored strongest overall due to its ability to integrate simulation with the widest range of adjacent industrial software and hardware. This integration provides the most robust end-to-end product offering to manufacturers. Another major strength of Siemens is virtual commissioning, delivered through its Simcenter and PLC Sim Advance tools. These tools allow simulation capabilities to extend to the machine control level, where individual machines can be virtualized and modeled to improve equipment efficiency and reduce failure rates. Dassault Systèmes very closely followed Siemens and topped the innovation category due to outstanding digital twin capabilities and analytics performance via the company’s impressive 3DExperience platform. These two companies stood out from the field and were therefore named Leaders in the report.
“It is no coincidence that the two companies with the strongest end-to-end software offerings across the smart manufacturing value chain have emerged as Leaders in this report,” said Ryan Martin, Principal Analyst at ABI Research. “Siemens and Dassault Systèmes can leverage their broad service offerings and industrial expertise to feed innovation and to implement complete solutions that equate to powerful and reliable simulations in discrete manufacturing.”
Three companies- Arena (Rockwell), AnyLogic and FlexSim- were named as Followers in the report. While these companies lack the full range of simulation capabilities of the Leaders, especially at the machine and equipment level, they have strong modeling and analytics capabilities. They, therefore, provide effective solutions for simulating factory floor layouts to optimize discrete manufacturing performance according to key metrics such as product throughput, machine downtime, capacity, and inventory levels. Arena, owned by Rockwell Automation, topped the Followers category due to strong performance in data modelling and analytics. Arena’s complex variability modeling capabilities and its strong installed base within the market contributed to a strong score in implementation.
“Ultimately the companies that scored best in the ranking can go beyond high-level factory layout simulation by also accurately modeling and commissioning industrial equipment on the factory floor and incorporating product design into the simulation environment. This means the way machines behave and how they are used to manufacture actual products is considered more comprehensively, a key factor in generating more reliable simulations. For this reason, Siemens and Dassault Systèmes stand out as market leaders in discrete manufacturing simulation software,” concludes Martin.
These findings are from ABI Research’s Manufacturing Simulation Software Competitive Assessment report. This report is part of the company’s Industrial Solution, which offers up-to-date research, data, and analyst insights for key stakeholders within manufacturing and industrial verticals. Competitive assessments are based on thorough research and insights and aim to deliver unbiased, objective performance assessments of the key players within their respective solution areas.
About ABI Research
ABI Research provides strategic guidance to visionaries, delivering actionable intelligence on the transformative technologies that are dramatically reshaping industries, economies, and workforces across the world. ABI Research’s global team of analysts publish groundbreaking studies often years ahead of other technology advisory firms, empowering our clients to stay ahead of their markets and their competitors.
Suggested Items
Real Time with… IPC APEX EXPO 2024: Tools, Training, and Trends in Manufacturing Engineering
04/25/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and Product Specialist Erik Bateham of Polar Instruments discuss Polar's latest technology, including their role in aiding manufacturing engineers. They highlight the advanced capabilities of Polar's tools and the critical role of signal integrity analysis, as well as the importance of accurate modeling in board manufacturing. Polar's unique training approach and demonstration contact details are also explored.
TTM Celebrates the Grand Opening of Its First Manufacturing Facility in Penang
04/25/2024 | TTM Technologies, Inc.TTM Technologies, Inc., a leading global manufacturer of technology solutions including mission systems, radio frequency (RF) components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards (PCBs), officially opened its first manufacturing plant in Penang, Malaysia with an investment of USD200 million (approximately RM958 million).
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Fujitsu, METRON Collaborate to Drive ESG Success
04/24/2024 | JCN NewswireFujitsu Limited and METRON SAS, a French cleantech company specializing in energy management solutions for industrial decarbonization, today announced a strategic initiative to contribute to the realization of carbon neutrality in the manufacturing industry.